On 01/26/2012 05:19 AM, Alexey Korolev wrote:
> If you apply the following patch and add to qemu command: --device
> ivshmem,size=32,shm="shm"
> ---
> diff --git a/hw/ivshmem.c b/hw/ivshmem.c
> index 1aa9e3b..71f8c21 100644
> --- a/hw/ivshmem.c
> +++ b/hw/ivshmem.c
> @@ -341,7 +341,7 @@ static void create_shared_memory_BAR(IVShmemState *s, int
> fd) {
> memory_region_add_subregion(&s->bar, 0, &s->ivshmem);
>
> /* region for shared memory */
> - pci_register_bar(&s->dev, 2, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->bar);
> + pci_register_bar(&s->dev, 2,
> PCI_BASE_ADDRESS_SPACE_MEMORY|PCI_BASE_ADDRESS_MEM_TYPE_64, &s->bar)
> }
>
> static void close_guest_eventfds(IVShmemState *s, int posn)
> ---
>
> You can get the following bootup log:
>
>
> Bootdata ok (command line is root=/dev/hda1 console=ttyS0,115200n8
> console=tty0)
> Linux version 2.6.18 (root@localhost.localdomain) (gcc version 4.1.2 20080704
> (Red Hat 4.1.2-48)) #3 SMP Tue Jan 17 16:37:33 NZDT 2012
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fffd000 (usable)
> BIOS-e820: 000000007fffd000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
> DMI 2.4 present.
> No NUMA configuration found
> Faking a node at 0000000000000000-000000007fffd000
> Bootmem setup node 0 0000000000000000-000000007fffd000
> ACPI: PM-Timer IO Port: 0xb008
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> Processor #0 6:2 APIC version 17
> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
> Setting APIC routing to physical flat
> ACPI: HPET id: 0x8086a201 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 88000000 (gap: 80000000:7effc000)
> SMP: Allowing 1 CPUs, 0 hotplug CPUs
> Built 1 zonelists. Total pages: 515393
> Kernel command line: root=/dev/hda1 console=ttyS0,115200n8 console=tty0
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> time.c: Using 100.000000 MHz WALL HPET GTOD HPET/TSC timer.
> time.c: Detected 2500.081 MHz processor.
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Checking aperture...
> Memory: 2058096k/2097140k available (3256k kernel code, 38656k reserved,
> 2266k data, 204k init)
> Calibrating delay using timer specific routine.. 5030.07 BogoMIPS
> (lpj=10060155)
> Mount-cache hash table entries: 256
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 4096K
> MCE: warning: using only 10 banks
> SMP alternatives: switching to UP code
> Freeing SMP alternatives: 36k freed
> ACPI: Core revision 20060707
> activating NMI Watchdog ... done.
> Using local APIC timer interrupts.
> result 62501506
> Detected 62.501 MHz APIC timer.
> Brought up 1 CPUs
> testing NMI watchdog ... OK.
> migration_cost=0
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: Using configuration type 1
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
> PCI quirk: region b000-b03f claimed by PIIX4 ACPI
> PCI quirk: region b100-b10f claimed by PIIX4 SMB
> ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
> ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0, disabled.
> SCSI subsystem initialized
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> divide error: 0000 [1] SMP
> CPU 0
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 2.6.18 #3
> RIP: 0010:[<ffffffff80388299>] [<ffffffff80388299>] hpet_alloc+0x12a/0x30c
> RSP: 0000:ffff81007e3a1e20 EFLAGS: 00010246
> RAX: 00038d7ea4c68000 RBX: 0000000000000000 RCX: 0000000000000000
> RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8057fc2b
> RBP: ffff81007e2e28c0 R08: ffffffff8055b492 R09: ffff81007e39f510
> R10: ffff81007e3a1e50 R11: 0000000000000098 R12: ffff81007e3a1e50
> R13: 0000000000000000 R14: ffffffffff5fe000 R15: 0000000000000000
> FS: 0000000000000000(0000) GS:ffffffff807fc000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000006e0
> Process swapper (pid: 1, threadinfo ffff81007e3a0000, task ffff81007e39f510)
> Stack: 0000000000000000 ffffffff80847470 0000000000000000 0000000000000000
> 0000000000000000 ffffffff8081e187 00000000fed00000 ffffffffff5fe000
> 0000000300010001 0000000800000002 0000000000000000 0000000000000000
> Call Trace:
> [<ffffffff8081e187>] late_hpet_init+0xa7/0xb2
> [<ffffffff8020717f>] init+0x139/0x2fe
> [<ffffffff8020a5b4>] child_rip+0xa/0x12
> DWARF2 unwinder stuck at child_rip+0xa/0x12
> Leftover inexact backtrace:
> [<ffffffff803544b6>] acpi_ds_init_one_object+0x0/0x82
> [<ffffffff80207046>] init+0x0/0x2fe
> [<ffffffff8020a5aa>] child_rip+0x0/0x12
>
>
> Code: 48 f7 f6 83 7d 30 01 8b 75 34 48 89 45 20 49 8b 4c 24 08 48
> RIP [<ffffffff80388299>] hpet_alloc+0x12a/0x30c
> RSP <ffff81007e3a1e20>
> <0>Kernel panic - not syncing: Attempted to kill init!
> NMI Watchdog detected LOCKUP on CPU 0
> CPU 0
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 2.6.18 #3
> RIP: 0010:[<ffffffff8033fa93>] [<ffffffff8033fa93>] __delay+0x6/0x10
> RSP: 0000:ffff81007e3a1b50 EFLAGS: 00000293
> RAX: 00000000000480f3 RBX: 0000000000000000 RCX: 000000008dea8c6a
> RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000265e28
> RBP: 00000000000009b0 R08: 0000000000000000 R09: ffff8100010503d4
> R10: 0000000000000001 R11: ffffffff8034e288 R12: 0000000000000000
> R13: 000000000000000b R14: ffffffff8055bc9f R15: 0000000000000000
> FS: 0000000000000000(0000) GS:ffffffff807fc000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000006e0
> Process swapper (pid: 1, threadinfo ffff81007e3a0000, task ffff81007e39f510)
> Stack: ffffffff80230a09 0000003000000008 ffff81007e3a1c48 ffff81007e3a1b78
> 0000000000000246 ffffffff8055bc9f 0000000000000246 ffff81007e39f510
> 0000000000000000 0000000000000000 ffff8100010503d4 0000000000000000
> Call Trace:
> [<ffffffff80230a09>] panic+0x12c/0x12f
> [<ffffffff802338c5>] do_exit+0x85/0x87b
> [<ffffffff8020b0df>] kernel_math_error+0x0/0x90
>
> Code: 0f 31 29 c8 48 39 f8 72 f5 c3 65 8b 04 25 2c 00 00 00 48 98
> console shuts up ...
> <0>Kernel panic - not syncing: Attempted to kill init!
>
>
> Please look at HPET lines. HPET is mapped to 0xfed00000.
> Size of ivshmem is 32MB. During pci enumeration ivshmem will corrupt the
> range from 0xfe000000 - 0xffffffff.
> It overlaps HPET memory. When Linux does late_hpet init, it finds garbage and
> this is causing panic.
>
Let me see if I get this right: during BAR sizing, the guest sets the
BAR to ~1, which means 4GB-32MB -> 4GB, which overlaps the HPET. If so,
that's expected behaviour. If the guest doesn't want this memory there,
it should disable mmio.
--
error compiling committee.c: too many arguments to function
