On 4/7/23 00:34, liweiwei wrote:
On 2023/4/7 09:14, liweiwei wrote:
On 2023/4/7 04:22, Daniel Henrique Barboza wrote:
Hi,
This patch is going to break the sifive_u boot if I rebase
"[PATCH v6 0/9] target/riscv: rework CPU extensions validation"
on top of it, as it is the case today with the current riscv-to-apply.next.
The reason is that the priv spec version for Zca is marked as 1_12_0, and
the priv spec version for both sifive CPUs is 1_10_0, and both are enabling
RVC.
This patch from that series above:
"[PATCH v6 5/9] target/riscv/cpu.c: add priv_spec validate/disable_exts helpers"
Makes the disabling of the extension based on priv version to happen *after* we
do all the validations, instead of before as we're doing today. Zca (and Zcd)
will
be manually enabled just to be disabled shortly after by the priv spec code. And
this will happen:
Yeah, I didn't take priv_version into consideration before.
This is a new problem if we disable them at the end and was not triggered in my
previous tests.
Not only Zca and Zcd, Zcf also has the same problem.
qemu-system-riscv64: warning: disabling zca extension for hart
0x0000000000000000 because privilege spec version does not match
qemu-system-riscv64: warning: disabling zca extension for hart
0x0000000000000001 because privilege spec version does not match
qemu-system-riscv64: warning: disabling zcd extension for hart
0x0000000000000001 because privilege spec version does not match
(--- hangs ---)
This means that the assumption made in this patch - that Zca implies RVC - is no
longer valid, and all these translations won't work.
As specified in Zc* spec, Zca is the subset of RVC. C & F include Zcf in RV32. C
& D include Zcd.
Some possible solutions:
- Do not use Zca as a synonym for RVC, i.e. drop this patch. We would need to
convert
all Zca checks to RVC checks in all translation code.
We should check both Zca and RVC in this way.
Similarly, we also should check both C&F and Zcf for Zcf instructions, C&D and
Zcd for Zcd instructions.
I can update this patchset or add a new patch for it if needed.
- Do not apply patch 5/9 from that series that moves the disable_ext code to
the end
of validation. Also a possibility, but we would be sweeping the problem under
the rug.
Zca still can't be used as a RVC replacement due to priv spec version
constraints, but
we just won't disable Zca because we'll keep validating exts too early (which
is the
problem that the patch addresses).
- change the priv spec of the sifive CPUs - and everyone that uses RVC - to
1_12_0. Not
sure if this makes sense.
- do not disable any extensions due to privilege spec version mismatch. This
would make
all the priv_version related artifacts to be more "educational" than to be an
actual
configuration we want to enforce. Not sure if that would do any good in the
end, but
it's also a possibility.
I prefer this way. For vendor-specific cpu types, the implicitly implied
extensions will have no effect on its function,
and this can be invisible to user if we mask them in isa_string exposed to the
kernel.
The question is whether we need constrain the configuration for general cpu
type.
Subset extension for another extension is not a single case in RISC-V. such as
zaamo is subset of A. Zfhmin is subset of Zfh.
Maybe some of them don't have this problem. However, I think it's better to
take the related work away from the developer.
I think we can combine the two method if we want to constrain the configuration
for general cpu type:
- remain disable extensions due to privilege spec version mismatch before
validation to disable the extensions manually set by users
- mask the implicitly enabled extensions in isa_string to make them invisible
to users (I have sent a new patch to do this, you can pick it into
your patchset if this way is acceptable).
I tested that patch with my series. If we keep the disable extension code to be
executed
before the validation, filtering the extensions that were user enabled only, it
fixes
the problem I reported here.
It's worth noticing though that we would be making the intended, conscious
decision of
hiding extensions from the isa_string that are actually enabled in the hart.
And CPUs
such as SIFIVE_CPU will start working with Z extensions that are beyond their
declared
priv spec. This wouldn't be a problem if we could guarantee that userland would
always
read 'isa_string' before using an extension, but in reality we can't guarantee
that.
Firing an instruction for a given extension and capturing SIGILL to see if the
hart supports
it or not isn't forbidden by the ISA.
All this said, I don't mind the proposed solution, as long as we're on the same
boat
w.r.t. the design changes and potential userspace impact this might have.
Thanks,
Daniel
Regards,
Weiwei Li
Regards,
Weiwei Li
I'll hold the rebase of that series until we sort this out. Thanks,
Daniel
On 3/7/23 05:13, Weiwei Li wrote:
Modify the check for C extension to Zca (C implies Zca).
Signed-off-by: Weiwei Li <liwei...@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqi...@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.hender...@linaro.org>
Reviewed-by: Alistair Francis <alistair.fran...@wdc.com>
Reviewed-by: Wilfred Mallawa <wilfred.mall...@wdc.com>
---
target/riscv/insn_trans/trans_rvi.c.inc | 4 ++--
target/riscv/translate.c | 8 ++++++--
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/target/riscv/insn_trans/trans_rvi.c.inc
b/target/riscv/insn_trans/trans_rvi.c.inc
index 4ad54e8a49..c70c495fc5 100644
--- a/target/riscv/insn_trans/trans_rvi.c.inc
+++ b/target/riscv/insn_trans/trans_rvi.c.inc
@@ -56,7 +56,7 @@ static bool trans_jalr(DisasContext *ctx, arg_jalr *a)
tcg_gen_andi_tl(cpu_pc, cpu_pc, (target_ulong)-2);
gen_set_pc(ctx, cpu_pc);
- if (!has_ext(ctx, RVC)) {
+ if (!ctx->cfg_ptr->ext_zca) {
TCGv t0 = tcg_temp_new();
misaligned = gen_new_label();
@@ -169,7 +169,7 @@ static bool gen_branch(DisasContext *ctx, arg_b *a, TCGCond
cond)
gen_set_label(l); /* branch taken */
- if (!has_ext(ctx, RVC) && ((ctx->base.pc_next + a->imm) & 0x3)) {
+ if (!ctx->cfg_ptr->ext_zca && ((ctx->base.pc_next + a->imm) & 0x3)) {
/* misaligned */
gen_exception_inst_addr_mis(ctx);
} else {
diff --git a/target/riscv/translate.c b/target/riscv/translate.c
index 0ee8ee147d..d1fdd0c2d7 100644
--- a/target/riscv/translate.c
+++ b/target/riscv/translate.c
@@ -549,7 +549,7 @@ static void gen_jal(DisasContext *ctx, int rd, target_ulong
imm)
/* check misaligned: */
next_pc = ctx->base.pc_next + imm;
- if (!has_ext(ctx, RVC)) {
+ if (!ctx->cfg_ptr->ext_zca) {
if ((next_pc & 0x3) != 0) {
gen_exception_inst_addr_mis(ctx);
return;
@@ -1122,7 +1122,11 @@ static void decode_opc(CPURISCVState *env, DisasContext
*ctx, uint16_t opcode)
if (insn_len(opcode) == 2) {
ctx->opcode = opcode;
ctx->pc_succ_insn = ctx->base.pc_next + 2;
- if (has_ext(ctx, RVC) && decode_insn16(ctx, opcode)) {
+ /*
+ * The Zca extension is added as way to refer to instructions in the C
+ * extension that do not include the floating-point loads and stores
+ */
+ if (ctx->cfg_ptr->ext_zca && decode_insn16(ctx, opcode)) {
return;
}
} else {