Signed-off-by: Philippe Mathieu-Daudé <phi...@linaro.org>
---
 target/riscv/cpu_helper.c    | 84 -------------------------------
 target/riscv/tcg/cpu.c       | 98 ++++++++++++++++++++++++++++++++++++
 target/riscv/tcg/meson.build |  1 +
 3 files changed, 99 insertions(+), 84 deletions(-)
 create mode 100644 target/riscv/tcg/cpu.c

diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c
index 597c47bc56..6f8778c6d3 100644
--- a/target/riscv/cpu_helper.c
+++ b/target/riscv/cpu_helper.c
@@ -64,90 +64,6 @@ int riscv_cpu_mmu_index(CPURISCVState *env, bool ifetch)
 #endif
 }
 
-void cpu_get_tb_cpu_state(CPURISCVState *env, vaddr *pc,
-                          uint64_t *cs_base, uint32_t *pflags)
-{
-    CPUState *cs = env_cpu(env);
-    RISCVCPU *cpu = RISCV_CPU(cs);
-    RISCVExtStatus fs, vs;
-    uint32_t flags = 0;
-
-    *pc = env->xl == MXL_RV32 ? env->pc & UINT32_MAX : env->pc;
-    *cs_base = 0;
-
-    if (cpu->cfg.ext_zve32f) {
-        /*
-         * If env->vl equals to VLMAX, we can use generic vector operation
-         * expanders (GVEC) to accerlate the vector operations.
-         * However, as LMUL could be a fractional number. The maximum
-         * vector size can be operated might be less than 8 bytes,
-         * which is not supported by GVEC. So we set vl_eq_vlmax flag to true
-         * only when maxsz >= 8 bytes.
-         */
-        uint32_t vlmax = vext_get_vlmax(cpu, env->vtype);
-        uint32_t sew = FIELD_EX64(env->vtype, VTYPE, VSEW);
-        uint32_t maxsz = vlmax << sew;
-        bool vl_eq_vlmax = (env->vstart == 0) && (vlmax == env->vl) &&
-                           (maxsz >= 8);
-        flags = FIELD_DP32(flags, TB_FLAGS, VILL, env->vill);
-        flags = FIELD_DP32(flags, TB_FLAGS, SEW, sew);
-        flags = FIELD_DP32(flags, TB_FLAGS, LMUL,
-                           FIELD_EX64(env->vtype, VTYPE, VLMUL));
-        flags = FIELD_DP32(flags, TB_FLAGS, VL_EQ_VLMAX, vl_eq_vlmax);
-        flags = FIELD_DP32(flags, TB_FLAGS, VTA,
-                           FIELD_EX64(env->vtype, VTYPE, VTA));
-        flags = FIELD_DP32(flags, TB_FLAGS, VMA,
-                           FIELD_EX64(env->vtype, VTYPE, VMA));
-        flags = FIELD_DP32(flags, TB_FLAGS, VSTART_EQ_ZERO, env->vstart == 0);
-    } else {
-        flags = FIELD_DP32(flags, TB_FLAGS, VILL, 1);
-    }
-
-#ifdef CONFIG_USER_ONLY
-    fs = EXT_STATUS_DIRTY;
-    vs = EXT_STATUS_DIRTY;
-#else
-    flags = FIELD_DP32(flags, TB_FLAGS, PRIV, env->priv);
-
-    flags |= cpu_mmu_index(env, 0);
-    fs = get_field(env->mstatus, MSTATUS_FS);
-    vs = get_field(env->mstatus, MSTATUS_VS);
-
-    if (env->virt_enabled) {
-        flags = FIELD_DP32(flags, TB_FLAGS, VIRT_ENABLED, 1);
-        /*
-         * Merge DISABLED and !DIRTY states using MIN.
-         * We will set both fields when dirtying.
-         */
-        fs = MIN(fs, get_field(env->mstatus_hs, MSTATUS_FS));
-        vs = MIN(vs, get_field(env->mstatus_hs, MSTATUS_VS));
-    }
-
-    /* With Zfinx, floating point is enabled/disabled by Smstateen. */
-    if (!riscv_has_ext(env, RVF)) {
-        fs = (smstateen_acc_ok(env, 0, SMSTATEEN0_FCSR) == RISCV_EXCP_NONE)
-             ? EXT_STATUS_DIRTY : EXT_STATUS_DISABLED;
-    }
-
-    if (cpu->cfg.debug && !icount_enabled()) {
-        flags = FIELD_DP32(flags, TB_FLAGS, ITRIGGER, env->itrigger_enabled);
-    }
-#endif
-
-    flags = FIELD_DP32(flags, TB_FLAGS, FS, fs);
-    flags = FIELD_DP32(flags, TB_FLAGS, VS, vs);
-    flags = FIELD_DP32(flags, TB_FLAGS, XL, env->xl);
-    flags = FIELD_DP32(flags, TB_FLAGS, AXL, cpu_address_xl(env));
-    if (env->cur_pmmask != 0) {
-        flags = FIELD_DP32(flags, TB_FLAGS, PM_MASK_ENABLED, 1);
-    }
-    if (env->cur_pmbase != 0) {
-        flags = FIELD_DP32(flags, TB_FLAGS, PM_BASE_ENABLED, 1);
-    }
-
-    *pflags = flags;
-}
-
 void riscv_cpu_update_mask(CPURISCVState *env)
 {
     target_ulong mask = 0, base = 0;
diff --git a/target/riscv/tcg/cpu.c b/target/riscv/tcg/cpu.c
new file mode 100644
index 0000000000..2ae6919b80
--- /dev/null
+++ b/target/riscv/tcg/cpu.c
@@ -0,0 +1,98 @@
+/*
+ * RISC-V CPU helpers (TCG specific)
+ *
+ * Copyright (c) 2016-2017 Sagar Karandikar, sag...@eecs.berkeley.edu
+ * Copyright (c) 2017-2018 SiFive, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "cpu.h"
+#ifndef CONFIG_USER_ONLY
+#include "sysemu/cpu-timers.h"
+#endif
+
+void cpu_get_tb_cpu_state(CPURISCVState *env, vaddr *pc,
+                          uint64_t *cs_base, uint32_t *pflags)
+{
+    CPUState *cs = env_cpu(env);
+    RISCVCPU *cpu = RISCV_CPU(cs);
+    RISCVExtStatus fs, vs;
+    uint32_t flags = 0;
+
+    *pc = env->xl == MXL_RV32 ? env->pc & UINT32_MAX : env->pc;
+    *cs_base = 0;
+
+    if (cpu->cfg.ext_zve32f) {
+        /*
+         * If env->vl equals to VLMAX, we can use generic vector operation
+         * expanders (GVEC) to accerlate the vector operations.
+         * However, as LMUL could be a fractional number. The maximum
+         * vector size can be operated might be less than 8 bytes,
+         * which is not supported by GVEC. So we set vl_eq_vlmax flag to true
+         * only when maxsz >= 8 bytes.
+         */
+        uint32_t vlmax = vext_get_vlmax(cpu, env->vtype);
+        uint32_t sew = FIELD_EX64(env->vtype, VTYPE, VSEW);
+        uint32_t maxsz = vlmax << sew;
+        bool vl_eq_vlmax = (env->vstart == 0) && (vlmax == env->vl) &&
+                           (maxsz >= 8);
+        flags = FIELD_DP32(flags, TB_FLAGS, VILL, env->vill);
+        flags = FIELD_DP32(flags, TB_FLAGS, SEW, sew);
+        flags = FIELD_DP32(flags, TB_FLAGS, LMUL,
+                           FIELD_EX64(env->vtype, VTYPE, VLMUL));
+        flags = FIELD_DP32(flags, TB_FLAGS, VL_EQ_VLMAX, vl_eq_vlmax);
+        flags = FIELD_DP32(flags, TB_FLAGS, VTA,
+                           FIELD_EX64(env->vtype, VTYPE, VTA));
+        flags = FIELD_DP32(flags, TB_FLAGS, VMA,
+                           FIELD_EX64(env->vtype, VTYPE, VMA));
+        flags = FIELD_DP32(flags, TB_FLAGS, VSTART_EQ_ZERO, env->vstart == 0);
+    } else {
+        flags = FIELD_DP32(flags, TB_FLAGS, VILL, 1);
+    }
+
+#ifdef CONFIG_USER_ONLY
+    fs = EXT_STATUS_DIRTY;
+    vs = EXT_STATUS_DIRTY;
+#else
+    flags = FIELD_DP32(flags, TB_FLAGS, PRIV, env->priv);
+
+    flags |= cpu_mmu_index(env, 0);
+    fs = get_field(env->mstatus, MSTATUS_FS);
+    vs = get_field(env->mstatus, MSTATUS_VS);
+
+    if (env->virt_enabled) {
+        flags = FIELD_DP32(flags, TB_FLAGS, VIRT_ENABLED, 1);
+        /*
+         * Merge DISABLED and !DIRTY states using MIN.
+         * We will set both fields when dirtying.
+         */
+        fs = MIN(fs, get_field(env->mstatus_hs, MSTATUS_FS));
+        vs = MIN(vs, get_field(env->mstatus_hs, MSTATUS_VS));
+    }
+
+    /* With Zfinx, floating point is enabled/disabled by Smstateen. */
+    if (!riscv_has_ext(env, RVF)) {
+        fs = (smstateen_acc_ok(env, 0, SMSTATEEN0_FCSR) == RISCV_EXCP_NONE)
+             ? EXT_STATUS_DIRTY : EXT_STATUS_DISABLED;
+    }
+
+    if (cpu->cfg.debug && !icount_enabled()) {
+        flags = FIELD_DP32(flags, TB_FLAGS, ITRIGGER, env->itrigger_enabled);
+    }
+#endif
+
+    flags = FIELD_DP32(flags, TB_FLAGS, FS, fs);
+    flags = FIELD_DP32(flags, TB_FLAGS, VS, vs);
+    flags = FIELD_DP32(flags, TB_FLAGS, XL, env->xl);
+    flags = FIELD_DP32(flags, TB_FLAGS, AXL, cpu_address_xl(env));
+    if (env->cur_pmmask != 0) {
+        flags = FIELD_DP32(flags, TB_FLAGS, PM_MASK_ENABLED, 1);
+    }
+    if (env->cur_pmbase != 0) {
+        flags = FIELD_DP32(flags, TB_FLAGS, PM_BASE_ENABLED, 1);
+    }
+
+    *pflags = flags;
+}
diff --git a/target/riscv/tcg/meson.build b/target/riscv/tcg/meson.build
index 65670493b1..a615aafd9a 100644
--- a/target/riscv/tcg/meson.build
+++ b/target/riscv/tcg/meson.build
@@ -8,6 +8,7 @@ gen = [
 riscv_ss.add(when: 'CONFIG_TCG', if_true: gen)
 
 riscv_ss.add(when: 'CONFIG_TCG', if_true: files(
+  'cpu.c',
   'fpu_helper.c',
   'op_helper.c',
   'vector_helper.c',
-- 
2.38.1


Reply via email to