This looks great! Thanks for this proposal.
On Fri, Sep 1, 2023 at 1:00 PM Alex Bennée <alex.ben...@linaro.org> wrote:
> Currently QEMU has to know some details about the VirtIO device
> supported by a vhost-user daemon to be able to setup the guest. This
> makes it hard for QEMU to add support for additional vhost-user
> daemons without adding specific stubs for each additional VirtIO
> device.
>
> This patch suggests a new feature flag (VHOST_USER_PROTOCOL_F_PROBE)
> which the back-end can advertise which allows a probe message to be
> sent to get all the details QEMU needs to know in one message.
>
> Together with the existing features VHOST_USER_PROTOCOL_F_STATUS and
> VHOST_USER_PROTOCOL_F_CONFIG we can create "standalone" vhost-user
> daemons which are capable of handling all aspects of the VirtIO
> transactions with only a generic stub on the QEMU side. These daemons
> can also be used without QEMU in situations where there isn't a full
> VMM managing their setup.
>
> Signed-off-by: Alex Bennée <alex.ben...@linaro.org>
>
> ---
> v2
> - dropped F_STANDALONE in favour of F_PROBE
> - split probe details across several messages
> - probe messages don't automatically imply a standalone daemon
> - add wording where probe details interact (F_MQ/F_CONFIG)
> - define VMM and make clear QEMU is only one of many potential VMMs
> - reword commit message
> ---
> docs/interop/vhost-user.rst | 90 ++++++++++++++++++++++++++++++++-----
> hw/virtio/vhost-user.c | 8 ++++
> 2 files changed, 88 insertions(+), 10 deletions(-)
>
> diff --git a/docs/interop/vhost-user.rst b/docs/interop/vhost-user.rst
> index 5a070adbc1..ba3b5e07b7 100644
> --- a/docs/interop/vhost-user.rst
> +++ b/docs/interop/vhost-user.rst
> @@ -7,6 +7,7 @@ Vhost-user Protocol
> ..
> Copyright 2014 Virtual Open Systems Sarl.
> Copyright 2019 Intel Corporation
> + Copyright 2023 Linaro Ltd
> Licence: This work is licensed under the terms of the GNU GPL,
> version 2 or later. See the COPYING file in the top-level
> directory.
> @@ -27,17 +28,31 @@ The protocol defines 2 sides of the communication,
> *front-end* and
> *back-end*. The *front-end* is the application that shares its
> virtqueues, in
> our case QEMU. The *back-end* is the consumer of the virtqueues.
>
> -In the current implementation QEMU is the *front-end*, and the *back-end*
> -is the external process consuming the virtio queues, for example a
> -software Ethernet switch running in user space, such as Snabbswitch,
> -or a block device back-end processing read & write to a virtual
> -disk. In order to facilitate interoperability between various back-end
> -implementations, it is recommended to follow the :ref:`Backend program
> -conventions <backend_conventions>`.
> +In the current implementation a Virtual Machine Manager (VMM) such as
> +QEMU is the *front-end*, and the *back-end* is the external process
> +consuming the virtio queues, for example a software Ethernet switch
> +running in user space, such as Snabbswitch, or a block device back-end
> +processing read & write to a virtual disk. In order to facilitate
> +interoperability between various back-end implementations, it is
> +recommended to follow the :ref:`Backend program conventions
> +<backend_conventions>`.
>
> The *front-end* and *back-end* can be either a client (i.e. connecting) or
> server (listening) in the socket communication.
>
> +Probing device details
> +----------------------
> +
> +Traditionally the vhost-user daemon *back-end* shares configuration
> +responsibilities with the VMM *front-end* which needs to know certain
> +key bits of information about the device. This means the VMM needs to
> +define at least a minimal stub for each VirtIO device it wants to
> +support. If the daemon supports the right set of protocol features the
> +VMM can probe the daemon for the information it needs to setup the
> +device. See :ref:`Probing features for standalone daemons
> +<probing_features>` for more details.
> +
> +
> Support for platforms other than Linux
> --------------------------------------
>
> @@ -316,6 +331,7 @@ replies. Here is a list of the ones that do:
> * ``VHOST_USER_GET_VRING_BASE``
> * ``VHOST_USER_SET_LOG_BASE`` (if ``VHOST_USER_PROTOCOL_F_LOG_SHMFD``)
> * ``VHOST_USER_GET_INFLIGHT_FD`` (if
> ``VHOST_USER_PROTOCOL_F_INFLIGHT_SHMFD``)
> +* ``VHOST_USER_GET_BACKEND_SPECS`` (if
> ``VHOST_USER_PROTOCOL_F_STANDALONE``)
>
> .. seealso::
>
> @@ -396,9 +412,10 @@ must support changing some configuration aspects on
> the fly.
> Multiple queue support
> ----------------------
>
> -Many devices have a fixed number of virtqueues. In this case the
> front-end
> -already knows the number of available virtqueues without communicating
> with the
> -back-end.
> +Many devices have a fixed number of virtqueues. In this case the
> +*front-end* usually already knows the number of available virtqueues
> +without communicating with the back-end. For standalone daemons this
> +number can be can be probed with the ``VHOST_USER_GET_MIN_VQ`` message.
>
> Some devices do not have a fixed number of virtqueues. Instead the
> maximum
> number of virtqueues is chosen by the back-end. The number can depend on
> host
> @@ -885,6 +902,23 @@ Protocol features
> #define VHOST_USER_PROTOCOL_F_CONFIGURE_MEM_SLOTS 15
> #define VHOST_USER_PROTOCOL_F_STATUS 16
> #define VHOST_USER_PROTOCOL_F_XEN_MMAP 17
> + #define VHOST_USER_PROTOCOL_F_PROBE 18
> +
> +.. _probing_features:
> +
> +Probing features for standalone daemons
> +---------------------------------------
> +
> +The protocol feature ``VHOST_USER_PROTOCOL_F_PROBE`` enables a number
> +of additional messages which allow the *front-end* to probe details
> +about the VirtIO device from the *back-end*. However for a *back-end*
> +to be described as standalone it must also support:
> +
> + * ``VHOST_USER_PROTOCOL_F_STATUS``
> + * ``VHOST_USER_PROTOCOL_F_CONFIG`` (if there is a config space)
> +
> +which are required to ensure the *back-end* daemon can operate
> +without the *front-end* managing some aspects of its configuration.
>
> Front-end message types
> -----------------------
> @@ -1440,6 +1474,42 @@ Front-end message types
> query the back-end for its device status as defined in the Virtio
> specification.
>
> +``VHOST_USER_GET_DEVICE_ID``
> + :id: 41
> + :request payload: N/A
> + :reply payload: ``u32``
> +
> + When the ``VHOST_USER_PROTOCOL_F_PROBE`` protocol feature has been
> + successfully negotiated, this message is submitted by the front-end
> + to query what VirtIO device the back-end support. This is intended
> + to remove the need for the front-end to know ahead of time what the
> + VirtIO device the backend emulates is.
> +
> +``VHOST_USER_GET_CONFIG_SIZE``
> + :id: 42
> + :request payload: N/A
> + :reply payload: ``u32``
> +
> + When the ``VHOST_USER_PROTOCOL_F_PROBE`` protocol feature has been
> + successfully negotiated, this message is submitted by the front-end
> + to query the size of the VirtIO device's config space. This is
> + intended to remove the need for the front-end to know ahead of time
> + what the size is. Replying with 0 when
> + ``VHOST_USER_PROTOCOL_F_CONFIG`` has been negotiated would indicate
> + an bug.
> +
> +``VHOST_USER_GET_MIN_VQ``
> + :id: 43
> + :request payload: N/A
> + :reply payload: ``u32``
> +
> + When the ``VHOST_USER_PROTOCOL_F_PROBE`` protocol feature has been
> + successfully negotiated, this message is submitted by the front-end to
> + query minimum number of VQ's required to support the device. A
> + device may support more than this number of VQ's if it advertises
> + the ``VHOST_USER_PROTOCOL_F_MQ`` protocol feature. Reporting a
> + number greater than the result of ``VHOST_USER_GET_QUEUE_NUM`` would
> + indicate a bug.
>
>
Maybe I lack some background, but not sure what min_vq is here?
This looks like quering the number of VQs the backend requires/uses.
Which, in case of MQ, it may be bigger (which is where I assume comes the
`min`
part, if we consider `VHOST_USER_GET_QUEUE_NUM` the `max`).
Couldn't we reuse the `VHOST_USER_GET_QUEUE_NUM` type for this?
> Back-end message types
> ----------------------
> diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c
> index 8dcf049d42..4d433cdf2b 100644
> --- a/hw/virtio/vhost-user.c
> +++ b/hw/virtio/vhost-user.c
> @@ -202,6 +202,13 @@ typedef struct VhostUserInflight {
> uint16_t queue_size;
> } VhostUserInflight;
>
> +typedef struct VhostUserBackendSpecs {
> + uint32_t device_id;
> + uint32_t config_size;
> + uint32_t min_vqs;
> + uint32_t max_vqs;
> +} VhostUserBackendSpecs;
> +
> typedef struct {
> VhostUserRequest request;
>
> @@ -226,6 +233,7 @@ typedef union {
> VhostUserCryptoSession session;
> VhostUserVringArea area;
> VhostUserInflight inflight;
> + VhostUserBackendSpecs specs;
> } VhostUserPayload;
>
> typedef struct VhostUserMsg {
> --
> 2.39.2
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: virtio-dev-unsubscr...@lists.oasis-open.org
> For additional commands, e-mail: virtio-dev-h...@lists.oasis-open.org
>
>
