I know that libvirt (which is huge) uses those. I am not up to date on
what the specific monitor and qmp commands are or where to find out.
So basically, I don't know either.
Hard killing the qemu process you launched yourself should be pretty
trivial using whatever tool/language you used to launch it.
On 21/12/2015 15:53, Wink Saville wrote:
Can you give me some pointers to implementations that use these
techniques. Txs.
On Mon, Dec 21, 2015, 4:02 AM Jakob Bohm <jb-gnumli...@wisemo.com
<mailto:jb-gnumli...@wisemo.com>> wrote:
There is a monitor and/or qmp command to simulate a "soft"
press on the power button, which would trigger any OS
provided clean shut down logic via ACPI/APM.
There is a different monitor and/or qmp command to simulate
a hard power off while still keeping the virtualization
aspect of e.g. qcow2 files consistent.
Finally, there is the option to simply kill the qemu
process.
On 19/12/2015 00:39, Wink Saville wrote:
> Peter,
>
> I ended up using the first technique for VersatilePB and works
just fine.
>
> Now I want to be able "power off" a qemu-system-i386 and I was
> wondering what you might suggest? I'm hoping there might be something
> "easy".
>
> -- Wink
>
> On Mon, Oct 19, 2015 at 1:49 PM Wink Saville <w...@saville.com
<mailto:w...@saville.com>
> <mailto:w...@saville.com <mailto:w...@saville.com>>> wrote:
>
> THANKS, I'll give those things a try!
>
>
> On Mon, Oct 19, 2015, 1:46 PM Peter Maydell
> <peter.mayd...@linaro.org <mailto:peter.mayd...@linaro.org>
<mailto:peter.mayd...@linaro.org <mailto:peter.mayd...@linaro.org>>>
wrote:
>
> On 19 October 2015 at 20:30, Wink Saville
<w...@saville.com <mailto:w...@saville.com>
> <mailto:w...@saville.com <mailto:w...@saville.com>>> wrote:
> > I would like to use qemu in a test environment where I give
> a "kernel" image
> > to qmeu have it execute it and then when complete have qemu
> exit. Currently
> > when
> > executing:
> >
> > $ qemu-system-arm -M versatilepb -m 128M -nographic
> -kernel test.bin
> > ...
> > Hi
> > $
> >
> > After test.bin prints "Hi" via the "Uart in VersatilePB" I
> have to
> > interactively press ctrl-a then press 'x' to have it return
> to the command
> > prompt. Is there a way for test.bin to cause qemu to exit
> without having to
> > type commands in the terminal.
>
> That depends on the machine you're using (in this case
> versatilepb).
> Basically if the guest binary tells the emulated hardware
"please
> power down" via whatever that hardware's mechanism is,
then QEMU
> will exit. For versatilepb there isn't any way to do
that, but you
> can use QEMU's "-no-reboot" option (which turns resets
into power
> downs) and then tell the emulated hardware to do a reset.
For info
> on how to do a reset on the versatilepb board see the h/w
docs:
>
http://infocenter.arm.com/help/topic/com.arm.doc.dui0224i/Caccifgi.html
> You need to write to SYS_LOCKCTL to unlock the register
and then
> to SYS_RESETCTL to actually request the reset.
>
> Other options you can use:
> * an ARM-specific option is to use the -semihosting
command line
> option, and then you can use the semihosting ABI to exit.
> You need to do an angel_SWIreason_ReportException:
>
http://infocenter.arm.com/help/topic/com.arm.doc.dui0471l/pge1358787050566.html
> (which is to say, set r0 to 0x18, r1 to 0x20026 and do a
> swi 0x123456 in ARM mode or swi 0xab (Thumb mode) or
> bkpt 0xab (M profile).
> Semihosting also lets you conveniently output to the
terminal,
> read files or look at the command line, so it's handy for
> writing test cases.
>
> * use the 'expect' utility to script up the "make QEMU exit
> when it's printed the result" handling. It's generally nicer
> to avoid this, but as a last resort it's nice to have: a
> handful of lines of expect scripting are sufficient to do
> basic "start this program, then exit when some string appears
> in its output" control.
>
> PS: you might prefer '-display none' over '-nographic';
> that gives you the serial output to standard output, but
> doesn't do the 'monitor on alternate screen, ctrl-a
<whatever>'
> behaviour. You can just ctrl-c to exit qemu then.
> Basically -nographic is a magic combination of a bunch
> of options and sometimes you only want one of them.
>
> thanks
> -- PMM
>
Enjoy and Merry Christmas
Jakob
--
Jakob Bohm, CIO, Partner, WiseMo A/S. https://www.wisemo.com
Transformervej 29, 2860 Søborg, Denmark. Direct +45 31 13 16 10
This public discussion message is non-binding and may contain errors.
WiseMo - Remote Service Management for PCs, Phones and Embedded