I sorry that I give the wrong info in last email and here is the IOMMU Group about 0000:41:00.0 :
IOMMU Group 40 41:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK208 [GeForce GT 710] [10de:1281] (rev a1) IOMMU Group 40 41:00.1 Audio device [0403]: NVIDIA Corporation GK208 HDMI/DP Audio Controller [10de:0e0f] (rev a1) I have other test in this case: I have two graphics card bios rom files: 1. One* ( rom A )* is export by : # echo 1 > /sys/bus/pci/devices/0000\:41\:00.0/rom # cat /sys/bus/pci/devices/0000\:41\:00.0/rom > /root/nvidia/gt710.rom # echo 0 > /sys/bus/pci/devices/0000\:41\:00.0/rom This is which I use now and mention in my first email. 2. Aother *( rom B ) *is exported by gpu-z in windows 7 : /root/nvidia/gpuz.rom As I write in my first email. VM had no output to screen and I can not ping the VM with /root/nvidia/gt710.rom. (Which works fine when I just pass group A or group B to vm.) And the newest test results are : (VM use 0000:41:00.0 while another using 0000:05:00.0) 1. VM work fine when I use *rom B* and installed *cento7* to VM . 2. VM had no output to then screen, but I can ping the VM when I use *rom B* and installed *window7* to VM, the gpu return code 43 in Device Manager. (Is that mean I use a wrong rom file ? ) 3. VM work fine when I start VM with *ovmf *in *windows 10 *(boot from *UEFI*). And here are my questions are: 1. Is this problems about the rom file of gpu? If the answer is 'yes' and : 2. How can I get the correct and useful rom file ? I want to use window7 in guest, but UEFI is unfriendly to windows7. 3. Why I can start my vm when I pass group B only and use *rom A*, but I can not start vm when I pass group A and B to vms and also use *rom A* ? Regards John 2017-01-10 15:57 GMT+08:00 Aleksei <alex3...@zoho.com>: > What about the other two, maybe they are in one group? > > Also, you had these addresses in your first email - 0000:04:00.0, > 0000:05:00.0, 0000:41:00.0, 0000:42:00.0.0 and now you have a GPU at > 44:00.0, are you changing physical allocation as well? > > *--Regards, Aleksei* > > ------------------------------ > > *From:* John Y. > *Sent:* Tuesday, January 10, 2017 3:44AM > *To:* Aleksei > *Cc:* Qemu-discuss > *Subject:* Re: [Qemu-discuss] Mutil gpu passthrough failed. > > Hi Aleksei, > > Thasks for your help. > > The PCIe slots is isolate: > > ./check_iommu.sh | grep IOMMU\ Group\ 41 > IOMMU Group 41 44:00.0 VGA compatible controller [0300]: NVIDIA > Corporation GK208 [GeForce GT 710] [10de:1281] (rev a1) > IOMMU Group 41 44:00.1 Audio device [0403]: NVIDIA Corporation GK208 > HDMI/DP Audio Controller [10de:0e0f] (rev a1) > > # ./check_iommu.sh | grep IOMMU\ Group\ 19 > IOMMU Group 19 05:00.0 VGA compatible controller [0300]: NVIDIA > Corporation GK208 [GeForce GT 710] [10de:1281] (rev a1) > IOMMU Group 19 05:00.1 Audio device [0403]: NVIDIA Corporation GK208 > HDMI/DP Audio Controller [10de:0e0f] (rev a1) > > I think the vm can not boot if I just pass group B to vm when system is > putting some PCIe slots in IOMMU groups. > > Any ideas? > > > 2017-01-09 23:34 GMT+08:00 Aleksei <alex3...@zoho.com>: > >> Check if your system is putting some PCIe slots in IOMMU groups, see >> explanation here: https://wiki.archlinux.org/ind >> ex.php/PCI_passthrough_via_OVMF#Plugging_your_guest_GPU_in_ >> an_unisolated_CPU-based_PCIe_slot >> >> *--Regards, Aleksei* >> >> ------------------------------ >> >> *From:* John Y. >> *Sent:* Monday, January 09, 2017 5:50PM >> *To:* Qemu-discuss >> *Subject:* [Qemu-discuss] Mutil gpu passthrough failed. >> >> My server has 4 PCI slots, their addresses are 0000:04:00.0, >> 0000:05:00.0, 0000:41:00.0, 0000:42:00.0. >> I want to pass 4 gpus to vms via vfio, each of vms has one gpu. >> >> Vms worked fine when I passed 0000:04:00.0 and 0000:05:00.0 to vms or >> passed 0000:41:00.0 and 0000:42:00.0 to vms. >> But vms which used 0000:41:00.0 and 0000:42:00.0 had no output to the >> screen and I could not ping vm's ip when I passed 0000:04:00, 0000:41:00.0 >> and 0000:42:00.0 to vms, but vm which used 0000:04:00 worked fine. >> I got the same result when I passed 0000:05:00, 0000:41:00.0 and >> 0000:42:00.0 to vms : vm with 0000:05:00 worked fine and vms which used >> 0000:41:00.0 and 0000:42:00.0 hanged. >> >> When I define 0000:04:00.0 and 0000:05:00.0 as group A, 0000:41:00.0 and >> 0000:42:00.0 as group B, the result is : >> 1. Vms work fine When I just pass group A or group B to vms. >> 2. Just group A works fine when the gpus that I pass to vms contain group >> A and B. >> >> In case 2, vms work fine when I used '-vga cirrus' instead of '-vga >> none'. But I get code 12 from graphics card in Device Manager of windows 7. >> And this is not what I want, I just want to use the graphics card in the >> host, so I should use '-vga none'. >> It also worked fine when I remove vga passthrough or just pass >> 0000:41:00.1(the hdmi audio of graphics card) to vm. >> >> I got no error output in qemu monitor. >> >> How can I solve this probem ? >> >> >> Version of qemu: >> QEMU emulator version 2.5.1.1, Copyright (c) 2003-2008 Fabrice Bellard >> >> Qemu command: >> /root/qemu25/qemu-system-x86_64 \ >> -name gputest_41 \ >> -machine q35,accel=kvm,usb=off,smm=off \ >> -cpu host \ >> -m 4096 \ >> -realtime mlock=off \ >> -smp 4,sockets=1,cores=4,threads=1 \ >> -no-user-config \ >> -nodefaults \ >> -rtc base=localtime \ >> -no-shutdown \ >> -boot strict=on \ >> -device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1e \ >> -device pci-bridge,chassis_nr=2,id=pci.2,bus=pci.1,addr=0x1 \ >> -drive >> file=/root/gpu/gputest_41/win7.qcow2,if=none,id=drive-virtio-disk0,format=qcow2 >> \ >> -device virtio-blk-pci,scsi=off,bus=pci.2,addr=0x2,drive=drive-virti >> o-disk0,id=virtio-disk0,bootindex=1 \ >> -k en-us \ >> -device virtio-balloon-pci,id=balloon0,bus=pci.2,addr=0x4 \ >> -device >> ioh3420,bus=pcie.0,addr=1c.0,multifunction=on,port=1,chassis=1,id=root.1 >> \ >> -device vfio-pci,host=41:00.0,bus=root.1,addr=00.0,multifunction=on, >> romfile=/root/nvidia/gt710.rom,x-vga=on \ >> -msg timestamp=on \ >> -vga none \ >> -cpu host,hv_vendor_id=1234567890ab,kvm=off \ >> -net nic,model=virtio \ >> -net >> tap,ifname=tap1,script=/root/qemu/qemu-ifup.sh,downscript=/root/qemu/qemu-ifdown.sh >> \ >> -monitor stdio >> >> System info: >> Linux ns.mqcache.net 4.2.0-1.el7.elrepo.x86_64 #1 SMP Sun Aug 30 >> 21:25:29 EDT 2015 x86_64 x86_64 x86_64 GNU/Linux >> >> Output of lspci -vvv: >> >> 05:00.0 VGA compatible controller: NVIDIA Corporation GK208 [GeForce GT >> 710] (rev a1) (prog-if 00 [VGA controller]) >> Subsystem: Micro-Star International Co., Ltd. [MSI] Device 2929 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin A routed to IRQ 15 >> NUMA node: 0 >> Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=16M] >> Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] >> Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M] >> Region 5: I/O ports at ec80 [size=128] >> Expansion ROM at d9000000 [disabled] [size=512K] >> Capabilities: [60] Power Management version 3 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold- >> ) >> Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- >> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ >> Address: 0000000000000000 Data: 0000 >> Capabilities: [78] Express (v2) Legacy Endpoint, MSI 00 >> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 >> <64us >> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- >> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ >> RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ >> MaxPayload 256 bytes, MaxReadReq 512 bytes >> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- >> LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s L1, Exit Latency L0s >> <512ns, L1 <4us >> ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ >> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ >> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >> LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- >> BWMgmt- ABWMgmt- >> DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not >> Supported >> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF >> Disabled >> LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- >> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- >> ComplianceSOS- >> Compliance De-emphasis: -6dB >> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, >> EqualizationPhase1+ >> EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest- >> Capabilities: [100 v1] Virtual Channel >> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 >> Arb: Fixed- WRR32- WRR64- WRR128- >> Ctrl: ArbSelect=Fixed >> Status: InProgress- >> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- >> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- >> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff >> Status: NegoPending- InProgress- >> Capabilities: [128 v1] Power Budgeting <?> >> Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 >> <?> >> Capabilities: [900 v1] #19 >> Kernel driver in use: vfio-pci >> Kernel modules: nouveau >> >> 05:00.1 Audio device: NVIDIA Corporation GK208 HDMI/DP Audio Controller >> (rev a1) >> Subsystem: Micro-Star International Co., Ltd. [MSI] Device 2929 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin B routed to IRQ 14 >> NUMA node: 0 >> Region 0: Memory at d9ffc000 (32-bit, non-prefetchable) [size=16K] >> Capabilities: [60] Power Management version 3 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold- >> ) >> Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- >> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ >> Address: 0000000000000000 Data: 0000 >> Capabilities: [78] Express (v2) Endpoint, MSI 00 >> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 >> <64us >> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 25.000W >> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ >> RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ >> MaxPayload 256 bytes, MaxReadReq 512 bytes >> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- >> LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s L1, Exit Latency L0s >> <512ns, L1 <4us >> ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ >> LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+ >> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >> LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- >> BWMgmt- ABWMgmt- >> DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not >> Supported >> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF >> Disabled >> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, >> EqualizationPhase1- >> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- >> Kernel driver in use: vfio-pci >> Kernel modules: snd_hda_intel >> >> 41:00.0 VGA compatible controller: NVIDIA Corporation GK208 [GeForce GT >> 710] (rev a1) (prog-if 00 [VGA controller]) >> Subsystem: Micro-Star International Co., Ltd. [MSI] Device 2929 >> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Interrupt: pin A routed to IRQ 15 >> NUMA node: 1 >> Region 0: Memory at b8000000 (32-bit, non-prefetchable) [disabled] >> [size=16M] >> Region 1: Memory at 98000000 (64-bit, prefetchable) [disabled] [size=128M] >> Region 3: Memory at a6000000 (64-bit, prefetchable) [disabled] [size=32M] >> Region 5: I/O ports at bc80 [disabled] [size=128] >> Expansion ROM at b9000000 [disabled] [size=512K] >> Capabilities: [60] Power Management version 3 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold- >> ) >> Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- >> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ >> Address: 0000000000000000 Data: 0000 >> Capabilities: [78] Express (v2) Legacy Endpoint, MSI 00 >> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 >> <64us >> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- >> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ >> RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ >> MaxPayload 256 bytes, MaxReadReq 512 bytes >> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- >> LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s L1, Exit Latency L0s >> <512ns, L1 <4us >> ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ >> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ >> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >> LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- >> BWMgmt- ABWMgmt- >> DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not >> Supported >> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF >> Disabled >> LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- >> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- >> ComplianceSOS- >> Compliance De-emphasis: -6dB >> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, >> EqualizationPhase1+ >> EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest- >> Capabilities: [100 v1] Virtual Channel >> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 >> Arb: Fixed- WRR32- WRR64- WRR128- >> Ctrl: ArbSelect=Fixed >> Status: InProgress- >> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- >> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- >> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff >> Status: NegoPending- InProgress- >> Capabilities: [128 v1] Power Budgeting <?> >> Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 >> <?> >> Capabilities: [900 v1] #19 >> Kernel driver in use: vfio-pci >> Kernel modules: nouveau >> >> 41:00.1 Audio device: NVIDIA Corporation GK208 HDMI/DP Audio Controller >> (rev a1) >> Subsystem: Micro-Star International Co., Ltd. [MSI] Device 2929 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin B routed to IRQ 14 >> NUMA node: 1 >> Region 0: Memory at b9ffc000 (32-bit, non-prefetchable) [size=16K] >> Capabilities: [60] Power Management version 3 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold- >> ) >> Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- >> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ >> Address: 0000000000000000 Data: 0000 >> Capabilities: [78] Express (v2) Endpoint, MSI 00 >> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 >> <64us >> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 25.000W >> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ >> RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ >> MaxPayload 256 bytes, MaxReadReq 512 bytes >> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- >> LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s L1, Exit Latency L0s >> <512ns, L1 <4us >> ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ >> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ >> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >> LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- >> BWMgmt- ABWMgmt- >> DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not >> Supported >> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF >> Disabled >> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, >> EqualizationPhase1- >> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- >> Kernel driver in use: vfio-pci >> Kernel modules: snd_hda_intel >> After starting vm: >> lspci -vvv >> 05:00.0 VGA compatible controller: NVIDIA Corporation GK208 [GeForce GT >> 710] (rev a1) (prog-if 00 [VGA controller]) >> Subsystem: Micro-Star International Co., Ltd. [MSI] Device 2929 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin A routed to IRQ 102 >> NUMA node: 0 >> Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=16M] >> Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] >> Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M] >> Region 5: I/O ports at ec80 [size=128] >> Expansion ROM at d9000000 [disabled] [size=512K] >> Capabilities: [60] Power Management version 3 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold- >> ) >> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- >> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ >> Address: 0000000000000000 Data: 0000 >> Capabilities: [78] Express (v2) Legacy Endpoint, MSI 00 >> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 >> <64us >> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- >> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ >> RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ >> MaxPayload 128 bytes, MaxReadReq 512 bytes >> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- >> LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s L1, Exit Latency L0s >> <1us, L1 <4us >> ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ >> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ >> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >> LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- >> ABWMgmt- >> DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not >> Supported >> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF >> Disabled >> LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- >> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- >> ComplianceSOS- >> Compliance De-emphasis: -6dB >> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, >> EqualizationPhase1+ >> EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest- >> Capabilities: [100 v1] Virtual Channel >> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 >> Arb: Fixed- WRR32- WRR64- WRR128- >> Ctrl: ArbSelect=Fixed >> Status: InProgress- >> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- >> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- >> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff >> Status: NegoPending- InProgress- >> Capabilities: [128 v1] Power Budgeting <?> >> Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 >> <?> >> Capabilities: [900 v1] #19 >> Kernel driver in use: vfio-pci >> Kernel modules: nouveau >> >> 05:00.1 Audio device: NVIDIA Corporation GK208 HDMI/DP Audio Controller >> (rev a1) >> Subsystem: Micro-Star International Co., Ltd. [MSI] Device 2929 >> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Latency: 0, Cache Line Size: 64 bytes >> Interrupt: pin B routed to IRQ 101 >> NUMA node: 0 >> Region 0: Memory at d9ffc000 (32-bit, non-prefetchable) [size=16K] >> Capabilities: [60] Power Management version 3 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold- >> ) >> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- >> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ >> Address: 0000000000000000 Data: 0000 >> Capabilities: [78] Express (v2) Endpoint, MSI 00 >> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 >> <64us >> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 25.000W >> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ >> RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ >> MaxPayload 256 bytes, MaxReadReq 512 bytes >> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- >> LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s L1, Exit Latency L0s >> <1us, L1 <4us >> ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ >> LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk- >> ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- >> LnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- >> ABWMgmt- >> DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not >> Supported >> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF >> Disabled >> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, >> EqualizationPhase1- >> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- >> Kernel driver in use: vfio-pci >> Kernel modules: snd_hda_intel >> 41:00.0 VGA compatible controller: NVIDIA Corporation GK208 [GeForce GT >> 710] (rev a1) (prog-if 00 [VGA controller]) >> Subsystem: Micro-Star International Co., Ltd. [MSI] Device 2929 >> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Interrupt: pin A routed to IRQ 104 >> NUMA node: 1 >> Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=16M] >> Region 1: Memory at 98000000 (64-bit, prefetchable) [size=128M] >> Region 3: Memory at a6000000 (64-bit, prefetchable) [size=32M] >> Region 5: I/O ports at bc80 [size=128] >> Expansion ROM at b9000000 [disabled] [size=512K] >> Capabilities: [60] Power Management version 3 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold- >> ) >> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- >> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ >> Address: 0000000000000000 Data: 0000 >> Capabilities: [78] Express (v2) Legacy Endpoint, MSI 00 >> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 >> <64us >> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- >> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ >> RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ >> MaxPayload 256 bytes, MaxReadReq 512 bytes >> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- >> LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s L1, Exit Latency L0s >> <512ns, L1 <4us >> ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ >> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ >> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >> LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- >> BWMgmt- ABWMgmt- >> DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not >> Supported >> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF >> Disabled >> LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- >> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- >> ComplianceSOS- >> Compliance De-emphasis: -6dB >> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, >> EqualizationPhase1+ >> EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest- >> Capabilities: [100 v1] Virtual Channel >> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 >> Arb: Fixed- WRR32- WRR64- WRR128- >> Ctrl: ArbSelect=Fixed >> Status: InProgress- >> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- >> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- >> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff >> Status: NegoPending- InProgress- >> Capabilities: [128 v1] Power Budgeting <?> >> Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 >> <?> >> Capabilities: [900 v1] #19 >> Kernel driver in use: vfio-pci >> Kernel modules: nouveau >> >> 41:00.1 Audio device: NVIDIA Corporation GK208 HDMI/DP Audio Controller >> (rev a1) >> Subsystem: Micro-Star International Co., Ltd. [MSI] Device 2929 >> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR+ FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- >> <MAbort- >SERR- <PERR- INTx- >> Interrupt: pin B routed to IRQ 103 >> NUMA node: 1 >> Region 0: Memory at b9ffc000 (32-bit, non-prefetchable) [size=16K] >> Capabilities: [60] Power Management version 3 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold- >> ) >> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- >> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ >> Address: 0000000000000000 Data: 0000 >> Capabilities: [78] Express (v2) Endpoint, MSI 00 >> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 >> <64us >> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 25.000W >> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ >> RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ >> MaxPayload 256 bytes, MaxReadReq 512 bytes >> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- >> LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s L1, Exit Latency L0s >> <512ns, L1 <4us >> ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ >> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ >> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >> LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- >> BWMgmt- ABWMgmt- >> DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not >> Supported >> DevCtl2: Completion Timeout: 65ms to 210ms, TimeoutDis-, LTR-, OBFF >> Disabled >> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, >> EqualizationPhase1- >> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- >> Kernel driver in use: vfio-pci >> Kernel modules: snd_hda_intel >> Regards >> John >> >> >> > >