this has been beaten to death by Astr0baby. Google is your friend.
On 10/12/21 2:16 PM, think3mm wrote:
Using the following on a RHEL7 VM to start the emulator:
./qemu-system-hppa -boot d -serial telnet::4444,server -drive
if=scsi,bus=0,index=6,file=./hpux.img,format=raw -D /tmp/foo
-nographic -m 512 -d nochain -cdrom ./hpux11-01.iso -D /tmp/foo -net
nic,model=tulip -net tap,ifname=tap0,script=no
with interfaces configured as follows:
3: tap0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
master br0 state DOWN group default qlen 1000
link/ether b6:b3:ee:c6:ba:14 brd ff:ff:ff:ff:ff:ff
inet6 fe80::b4b3:eeff:fec6:ba14/64 scope link
valid_lft forever preferred_lft forever
4: br0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
state DOWN group default qlen 1000
link/ether b6:b3:ee:c6:ba:14 brd ff:ff:ff:ff:ff:ff
inet 10.0.2.2/24 brd 10.0.2.255 scope global br0
valid_lft forever preferred_lft forever
inet6 fe80::9042:a6ff:fe72:50e5/64 scope link
valid_lft forever preferred_lft forever
...it appears to start:
QEMU 6.1.50 monitor - type 'help' for more information
(qemu) qemu-system-hppa: -serial telnet::4444,server: info: QEMU
waiting for connection on: disconnected:telnet:0.0.0.0:4444,server=on
However when I 'telnet localhost 4444', the emulator dies with the output:
qemu-system-hppa: no firmware provided
qemu-system-hppa: network script /root/hppa/../etc/qemu-ifdown failed
with status 256
Not sure how relevant those final messages are (e.g., I know I don't
have an ifdown script), but any ideas what I need to do to be able to
connect and install HPUX?
--