Hello all, I found by compiling u-boot-spl to start at 0x40200000 and using -kernel option, I can make u-boot-spl start loaded and started from 0x40200000. And then by loading the .itb file (FIT file) which contains u-boot proper binary at 0x40400000 using -device loader option, and setting CONFIG_SPL_LOAD_FIT_ADDERSS to 0x40400000 and I could make u-boot-spl execute u-boot at the end. To make .itb file, I used 'firmware = "uboot"' int the configuration, and 'type = "standalone"', 'os = "U-Boot"' and the 'uboot' image node. And I turned off SPL_BOOT_OS of course. I referenced the sample its files in u-boot. (I can't copy-paste the file now so I just tell you the key lines) Hope this helps someone layter. Thank you.
Chan Kim >-----Original Message----- >From: U-Boot <u-boot-boun...@lists.denx.de> On Behalf Of 김찬 >Sent: Tuesday, May 9, 2023 3:13 PM >To: U-Boot Mailing List <u-b...@lists.denx.de>; qemu-discuss@nongnu.org >Subject: RE: How should I build u-boot for qemu_arm64_defconfig and run it >on arm64 qemu virt machine? > > >Hi all, > >Hope someone who know this top reads this. >I made the pflashs.img with u-boot-spl and used it as the flash memory (from >address 0x00000000 ~). So the u-boot-spl program runs. >And I guess I have to load (using qemu command option) a kind of image that >contains u-boot proper and make the u-boot-spl to load u-boot proper at >another address from that image and jump to that address. >How can I make that image using mkimage if I have the u-boot.bin file? >I think the command should start like 'mkimage -O u-boot -T ... ' but I >don't know what type I should give for -T option. >I will be very much grateful If anyone tells me how to do it. >By the way, I want to check pci_init function once u-boot proper runs and I >found pci_init is called in board_init_r when u-boot proper runs. > >Thank you! >Chan Kim > >-----Original Message----- >From: "Chan Kim" <c...@etri.re.kr> >To: "U-Boot Mailing List" <u-b...@lists.denx.de>; <qemu- >disc...@nongnu.org>; >Cc: >Sent: 2023-05-08 (월) 18:40:49 (UTC+09:00) >Subject: How should I build u-boot for qemu_arm64_defconfig and run it on >arm64 qemu virt machine? > >Hello experts, > > > >Today I tried this test from scratch. > >In my environment, CROSS_COMPILE=aarch64-none-elf. > >Under u-boot directory, when I do 'make CROSS_COMPILE=aarch64-none-elf- >qemu_arm64_defconfig' and 'make -j28', I see this error at the end. > > > >aarch64-none-elf-ld.bfd: invalid length for memory region .sram > > > >after examining it, I added in include/configs/qemu-arm.h, > > > >#define CONFIG_SPL_MAX_SIZE value to 0x400000 > > > >After fixing it, I got another similar error for .sdram and I added in >include/configs/qemu-arm.h, > > > >#define CONFIG_SPL_BSS_START_ADDR 0x40800000 > >#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 > > > >Now I can do 'make -j28' with no error. > >But I found I have both 'u-boot' and 'spl/u-boot-spl' generated and I >realized for this qemu_arm64_defconfig, CONFIG_SPL=y and I get both u-boot >proper and u-boot spl. (SPL: secondary program loader, proper: main >bootloader. SPL runs first and the proper runs next). > > > >Until now I did objcopy of the u-boot(proper) and then extended it to >0x400000 byte. (the pflash size of the virt machine which starts at address >0x00000000). > >$ aarch64-none-elf-objcopy -O binary u-boot.v2022.07/u-boot pflashp.img > >$ dd if=/dev/zero of=pflashp.img bs=1c count=1 seek=67108863 > > > >And the qemu command is : > >$ qemu-6.2.0/build/aarch64-softmmu/qemu-system-aarch64 -machine virt,gic- >version=max,secure=on,virtualization=true -cpu max -drive >if=pflash,file=pflashp.img -m 2G -nographic -device >loader,file=linux-5.15.68/arch/arm64/boot/Image,addr=0x80200000 > > > >The qemu virt machine has RAM from 0x40000000 until 0xbfffffff. > >And I could see u-boot runs and it waits input for 3 seconds and outputs the >u-boot prompt. > >This is running u-boot (proper) from address 0 but since I have u-boot-spl >too, I should run it from u-boot-spl first, shouldn't I? > > > >How am I supposed to run u-boot-spl and u-boot on this qemu machine? (from >lds files, it looks like they both start at address 0). > >(qemu machine is arm64 virt machine, qemu 6.2.0). > > > > > >Thank you. > > > >Chan Kim > > >