Hi, ----- "custard" <cust...@westnet.com.au> wrote: > Hi, > > Wondering if someone could make some suggestions on this? > > I've a project that was originally set up in 1.6 and has 10 different > composers attached to it. > > I've loaded it up and resaved it into 1.7 (trunk). Now when I try and > print from any of these composers one of these two things happens: > 1. QGIS crashes. > 2. QGIS and the printer fail to complete talking to each other (the > printer says spooling and QGIS behaves like it's already finished > sending the data). At which point I usually get impatient and I try to > print a second time which causes 1. > > I've updated my osgeo install. > I've recreated one of my composers in the problem project (it doesn't > work). > I've attempted to replicate with a simple 1 shape project (it works > fine). > The other workspaces that I've tried seem fine. > > A type 1. bug trace is here: > http://www.members.westnet.com.au/ramon_et_al/QGISPrintErrorType1.txt > > A successful print (from the simple project) bug trace is here: > http://www.members.westnet.com.au/ramon_et_al/QGISSImpleProjectSucessfulPrint.txt > > > I can put up a type 2 but trace, when I get it happen again. > > I'm guessing, recreate the project and composers?
Type 2 here: http://www.members.westnet.com.au/ramon_et_al/Type2Error.txt (I think it reads as the first print is still active). -ramon. _______________________________________________ Qgis-user mailing list Qgis-user@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/qgis-user