Inna, Thank you for the detailed directions. I was able to correct the issue and move on with the lesson. I appreciate the help everyone has provided!
Wanda On Wed, Jan 13, 2021 at 5:42 AM Inna Nogeste <noge...@outlook.com> wrote: > Hi Wanda, > > > > When running QGIS Tools the default output is a temporary layer with the > words ”[Create temporary layer]” greyed out in the output sections which > indicate that a temporary layer will be created as the output layer. > > You have the option of saving your output to a permanent layer within QGIS > tools, in this instance to 3 permanent layers (Valid output, Invalid output > and Error output), by clicking on the … button to the far right of the > output box. > > The temporary layers can be exported to permanent layers by right clicking > on them in the Layers panel and selecting Export > select the option you > want. > > The Valid output shows the valid features in your input which have no > topological/geometric errors. The Invalid output and Error output layers > will show you where you have geometry errors. > > Using your invalid and error layers, zoom to the problematic areas and > edit the errors, for example, moving vertices so that they snap to the > adjoining vertices, or perhaps close polygons so that the start and end > vertices snap to each other. > > After you’ve fixed the errors it’s good to run the tool again in case > something has been missed. > > This QGIS page has an explanation of the Check validity tool and its > output layers > https://docs.qgis.org/3.16/en/docs/user_manual/processing_algs/qgis/vectorgeometry.html?highlight=check%20validity#check-validity > > This QGIS page explains Snapping so that your vertices for the respective > layers snap to each other’ > > > https://docs.qgis.org/3.16/en/docs/user_manual/working_with_vector/editing_geometry_attributes.html?highlight=snapping#index-1 > > > > This is a good forum to ask questions if you need help. > > > > Regards, > > Inna Nogeste > > > > *Från: *Wanda Norman <wanda.mnorman2...@gmail.com> > *Skickat: *den 12 januari 2021 22:47 > *Till: *Inna Nogeste <noge...@outlook.com> > *Kopia: *Alexandre Neto <senhor.n...@gmail.com>; qgis-user > <qgis-user@lists.osgeo.org> > *Ämne: *Re: [Qgis-user] QGIS 3.16 Training Manual - Module 8.2.1 - > Intersect features > > > > Thank you for the information. I did find that my project projection was > different then the vector analysis so I changed that to match. I also > tried the vector/Geometry tools/Check Validity. It gives me new temporary > layers but I don't understand what to do with them. Sorry, I am trying to > understand - but I feel like I am still missing something. > > > > > > On Tue, Jan 12, 2021 at 1:18 PM Inna Nogeste <noge...@outlook.com> wrote: > > The tutorial needs a lot of love to get it to the same level as the User > Guide 😊 I have a background in documentation but currently don’t have > time to devote all the time that is required to update the text, > screengrabs, URLs etc. I’ve encountered more issues today such as WMS and > WFS URLs/hyperlinks no longer working and more but currently don’t have the > time to go through any more tutorial pages. > > I’ll do what I can when I can. > > Could updating the tutorial be sponsored if deemed sufficiently important > to update? > > Regards, > > Inna Nogeste > > *Från: *Alexandre Neto <senhor.n...@gmail.com> > *Skickat: *den 11 januari 2021 19:44 > *Till: *Inna Nogeste <noge...@outlook.com> > *Kopia: *Wanda Norman <wanda.mnorman2...@gmail.com>; qgis-user > <qgis-user@lists.osgeo.org> > *Ämne: *Re: [Qgis-user] QGIS 3.16 Training Manual - Module 8.2.1 - > Intersect features > > Sure! > > Add a comment on github with @SrNetoChan to mention me. > > Thanks for your help! The training manual needs some love, but most > resources are directed to the user manual. > > Alexandre Neto > > > > A segunda, 11/01/2021, 17:37, Inna Nogeste <noge...@outlook.com> escreveu: > > Hi Alexandre, > > Thanks for your YouTube links, they help alot. I have made alot of notes > to date as to what should be updated in the QGIS 3.16 Training Manual and > will gradually add these to Git Hub using your YouTube instructions. > > I’ll let you know when I’ve started so that you can perhaps check that I > have done it correctly? > > Regards, > > Inna Nogeste > > *Från: *Alexandre Neto <senhor.n...@gmail.com> > *Skickat: *den 11 januari 2021 16:17 > *Till: *Inna Nogeste <noge...@outlook.com> > *Kopia: *Wanda Norman <wanda.mnorman2...@gmail.com>; qgis-user > <qgis-user@lists.osgeo.org> > *Ämne: *Re: [Qgis-user] QGIS 3.16 Training Manual - Module 8.2.1 - > Intersect features > > Hello Inna, > > If you want, I can help you make the change yourself :-) > > Or, alternatively, check the following videos to see how you can do it > > QGIS Documentation made easy - Part 1 > > https://youtu.be/PCiohDt-OBk > <https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fyoutu.be%2FPCiohDt-OBk&data=04%7C01%7C%7C9ac082157a034210862608d8b7439dec%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637460848318479612%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=nv%2Bzh4EpCnLhq5qK4o3OmNxSBlpB5KLb4Ick4yBWgOI%3D&reserved=0> > - part 1 > > https://youtu.be/19Bj0uXcdfU > <https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fyoutu.be%2F19Bj0uXcdfU&data=04%7C01%7C%7C9ac082157a034210862608d8b7439dec%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637460848318489606%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=RYT6D4fFVNBTVyHCAgIHLkMUb4ML6VWRzpku2uTtpeM%3D&reserved=0> > - part 2 > > Thanks > > Alexandre Neto > > On Mon, Jan 11, 2021 at 12:23 PM Inna Nogeste <noge...@outlook.com> wrote: > > Hi Wanda, > > Looking at my notes for what wasn’t working for me in the Training Manual > exercises, I see that I needed to make the following change in Step 6.2.8 > using QGIS 3.16 : > > “Need to set the processing option to Skip (Ignore) invalid geometry. > Seemed to be a problem with the buildings_34s layer? Changed this option > for both input and compare layers and it worked.” > > I hope this helps! > > Regards, > > Inna Nogeste > > Skickades från E-post > <https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgo.microsoft.com%2Ffwlink%2F%3FLinkId%3D550986&data=04%7C01%7C%7C9ac082157a034210862608d8b7439dec%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637460848318499600%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=yCHnzijW33j6kAIcN4DLDXd0zr6SnmiC01Lf8CN6EA4%3D&reserved=0> > för Windows 10 > > > > *Från: *Wanda Norman <wanda.mnorman2...@gmail.com> > *Skickat: *den 8 januari 2021 15:31 > *Till: *Inna Nogeste <noge...@outlook.com> > *Kopia: *qgis-user <qgis-user@lists.osgeo.org> > *Ämne: *Re: [Qgis-user] QGIS 3.16 Training Manual - Module 8.2.1 - > Intersect features > > I am getting the same error in the training module for lesson 6.2.9. I > have done the lesson twice thinking I had missed a step - but get to the > same point of extracting the buildings and get the error message. > > I am using QGIS 3.1 with Windows 10 on my HP laptop. > > Thanks! > > Wanda Norman > > > > On Thu, Jan 7, 2021 at 12:23 PM Inna Nogeste <noge...@outlook.com> wrote: > > I’m working through the training manual and completed all the preceding > modules and their output files. > > When I get to Module 8.2.1 > > > https://docs.qgis.org/3.16/en/docs/training_manual/complete_analysis/analysis_combination.html#moderate-ty > <https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdocs.qgis.org%2F3.16%2Fen%2Fdocs%2Ftraining_manual%2Fcomplete_analysis%2Fanalysis_combination.html%23moderate-ty&data=04%7C01%7C%7C9ac082157a034210862608d8b7439dec%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637460848318499600%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=2Pebak7fl6BMVE%2BY0gJ%2BIRdfwaD0oiz9rTm57Fv8U4E%3D&reserved=0> > > to intersect my previous output files I get an error message when I run > the Intersection tool that a feature in my Overlay layer ’has invalid > geometry. Please fix the geometry or change the Processing setting to the > “Ignore invalid input features” option.’ > > The overlay layer is a polygonized vector layer createdin a previous > modeul in the training manual from a raster layer. > > The invalid geometry in the polygonized layer represents 1 individual cell > in the original raster layer. Changing the Processing setting to ”Skip > (Ignore) Features with Invalid Geometries” doesn’t help and outputs an > empty layer. > > Has anyone else had problems with this module and the layer files created > in previous modules? > > I’ve noted that the original SRTM_41_19.TIF exercise data is in EPSG 32733 > and not EPSG 32734 as per the other exercise (vector) data and this causes > issues when you get to Module 8. > > I’m currently documenting discrepancies that I’m finding in the training > manual and am assuming that I can eventually add them to > https://github.com/qgis/QGIS-Documentation/issues?q=is%3Aissue+is%3Aopen+label%3AEasy > <https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fqgis%2FQGIS-Documentation%2Fissues%3Fq%3Dis%253Aissue%2Bis%253Aopen%2Blabel%253AEasy&data=04%7C01%7C%7C9ac082157a034210862608d8b7439dec%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637460848318509596%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=5qKUdW3pI6pWpuSedgdRWZW3e7Mz0bHrKt%2Bhc%2F%2Fw%2FDI%3D&reserved=0> > > Regards, > > Inna Nogeste > > Skickades från E-post > <https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgo.microsoft.com%2Ffwlink%2F%3FLinkId%3D550986&data=04%7C01%7C%7C9ac082157a034210862608d8b7439dec%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637460848318509596%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=r1uodFBTcWOVmSLHDwzH96y5SGFT0EGBK%2B0%2Fv%2FzPPN4%3D&reserved=0> > för Windows 10 > > > > _______________________________________________ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user > <https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.osgeo.org%2Fmailman%2Flistinfo%2Fqgis-user&data=04%7C01%7C%7C9ac082157a034210862608d8b7439dec%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637460848318519586%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=8s1Ucb%2BCX3NNASt2suy1ynllnzZ85yKhtNENXUnZkRE%3D&reserved=0> > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user > <https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.osgeo.org%2Fmailman%2Flistinfo%2Fqgis-user&data=04%7C01%7C%7C9ac082157a034210862608d8b7439dec%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637460848318529587%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=efp%2FjOqAhLDxD%2FNC8uluXR7KQ3IC96bax7el5oRXqIg%3D&reserved=0> > > > > _______________________________________________ > Qgis-user mailing list > Qgis-user@lists.osgeo.org > List info: https://lists.osgeo.org/mailman/listinfo/qgis-user > <https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.osgeo.org%2Fmailman%2Flistinfo%2Fqgis-user&data=04%7C01%7C%7C9ac082157a034210862608d8b7439dec%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637460848318529587%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=efp%2FjOqAhLDxD%2FNC8uluXR7KQ3IC96bax7el5oRXqIg%3D&reserved=0> > Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user > <https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.osgeo.org%2Fmailman%2Flistinfo%2Fqgis-user&data=04%7C01%7C%7C9ac082157a034210862608d8b7439dec%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637460848318539577%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=tJ%2Fh7fEf3%2BDnD2oXJVFZQuihFuq8uJ5QhCqz%2FasK4hs%3D&reserved=0> > > > > > > >
_______________________________________________ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user