Hi, I would like to ask you for advice with a problem that occurred after installing the Qfield application (latest version, but also older versions) on the Trimble TDC600 (android 8). I prepared a project in QGIS (3.14.16).
The cursor on the screen does not move at the same time as I move, there is a delay of about 70 seconds. I'm also sending a picture where I've tried to illustrate the problem. After I arrived at a certain place, I immediately made a point in front of the entrance to the building. The cursor at that time was about 100 m from that place and the position of the point was also recorded there (showing accuracy below 1m). The cursor was still moving to my place. By the time I took the photo (using a widget for photos), the cursor moved to a place about halfway between where I was standing and where the point was recorded. The coordinates of the cursor at that time were assigned. But the photo (towards the entrance to the building) was taken from the place where I was standing. Occasionally, the cursor reached the actual position and pointed accurately. But, if I wanted to add a new point, after saving, there was a delay again after adding it. There was no such problem with other applications (LocusGIS, Google maps, TerraFlex). The problem also occurred in these applications when Qfield was turned on simultaneously. I have good experience using the Qfield app on other devices (Trimble TDC100, android 5) or phones with higher versions of android. Can you help me how to solve this problem? Thank you. With regards Ivan Dananaj
_______________________________________________ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user