gdgqler wrote, On 12/11/09 11:04:
On 11 Nov 2009, at 15:47, arnold.cla...@talk21.com wrote:
When I remove Qubide everything works fine using the floppy disk to
boot up.
when reconnect Qubide it starts normal routine but when it restart
with Smsq, it stops at the first dot of the initialization dot. I
have another hard disk and it is the same with that.
I too, had the stopping at one dot with Qubide in my Aurora , Qubide
SuperHermes setup. I took the machine to the QUANTA AGM plus workshop
last April and J. Southern very kindly cured the problem saying "loose
connections". Since then the machine has worked properly except that
sometimes it will stop at one dot for a day or so. But it will usually
start working again after that pause. Why?
Ah I remember. I had similar problems when I used Qplane backplane. The
problem went away with Mplane.
I reckoned at the time it was a noise issue.
What backplane do you have Arnold?
Try a different arrangement of cards - maybe qubide nearer the QL, if
you are using Qplane.
Tony
--
QBBS (QL fido BBS 2:257/67) +44(0)1442-828255
t...@firshman.co.uk http://firshman.co.uk
Voice: +44(0)1442-828254 Fax: +44(0)1442-828255 Skype: tonyfirshman
TF Services, 29 Longfield Road, TRING, Herts, HP23 4DG
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
