Ralf, Rich, the manual says different (From the Trump card manual): " FORMAT ram1_mdv2 loads an image of mdv2 into RAM Disk 1 The RAM Disk can even load a Microdrive with a damaged directory. It cannot, however, load a Microdrive with a damaged map."
Note the example - It's identical to what Rich tried to do, so it should work on drive 2, too. From what you write, Rich, I understand mdv2_ is working fine on other commands? Did you try on a newly reset machine? Cheers, Tobias Am 15.04.2012 um 20:52 schrieb Ralf Reköndt: > As far as I know.....It only works with mdv1_. > > ----- Original Message ----- From: "Rich Mellor" <r...@rwapservices.co.uk> > To: <ql-us...@q-v-d.com> > Sent: Sunday, April 15, 2012 6:09 PM > Subject: [Ql-Users] FORMAT ram1_mdv2 Oddities > > >> I have an issue 6 QL (JS ROM), and have plugged a Super Gold Card into it. >> It seems a good QL with good working microdrive units. >> However, although FORMAT ram1_mdv1 works to make an image of the cartridge >> in the left hand drive, FORMAT ram1_mdv2 just waits and then gives up - >> FORMAT failed. >> Does anyone have any suggestions as to what may be the problem ?? >> I have swapped the ROM over on the Super Gold Card, and tried a second Super >> Gold Card, but it still exhibits the sme issue. >> The only thing I have not done is removed the 68008 processor. >> The microdrive units respond to all standard QDOS commands without any >> problems.. >> -- >> Rich Mellor >> RWAP Services >> Specialist Enuuk Auction Programming Services >> www.rwapservices.co.uk >> _______________________________________________ >> QL-Users Mailing List >> http://www.q-v-d.demon.co.uk/smsqe.htm > _______________________________________________ > QL-Users Mailing List > http://www.q-v-d.demon.co.uk/smsqe.htm _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
