Hi Fabrizio,
you can find that in smsq_q68_spp_ser_asm.
There , if you want, you can extend the little table at label "bauds"
beyond 230400. Also change the value of "moveq #8,d3" just above the
label bd_lp, probably to 9 if you only add one more value.
HTH
Wolfgang.
Hi all,
I have (finally) found some time to check Sernet connection between my
Q68 and QPC under Win10 (Mac Book using Parallel). To get COM1 I use a
USB-> RS232 converter
As expected Sernet works perfectly until 230400 Baud (19200*12), to get
more speed I tried 460800 (19200*24) but I got a "not implemented
error". All speed more than 230400 get a not implementation error in any
SMSQ/E system (QPC /Q68/Q60). I think that SMSQmulator don't have SER
driver.
I had a look at the SMSQE 3.32 sources and there are 2 "baud.asm" in
smsq/spp and sbext/ext but i cannot find where the speed check is.....
Finally what is the theoretically max ser speed of the Q68 is? and where
the SMSQ/e check this ?
Many thanks to any of the Guru that would like to answer:-):-)
Regards
Fabrizio
_______________________________________________
QL-Users Mailing List
_______________________________________________
QL-Users Mailing List
