On Thu, 26 Jul 2001 at 17:37:40, you wrote:
(ref: <[EMAIL PROTECTED]>)
>On Jeudi 26 Juillet 2001 09:16, Jerome Grimbert wrote:
>
>> My Q40 IDE is currently fully used. (One hard disk and an EZ-135,
>> for a total of 5 partitions).
>> I was wondering if it was possible to add a second I/O board on it,
>> and would it work with SMSQ/E ? Or even only with Linux ?
>
>It should work with both, provided you configure the new I/O board
>properly (secondary IDE channel I/O address and IRQ).
.. and disable serial/parallel/floppy of course. If you use the new
board for parallel, you will need to remove the IRQ jumper.
--
QBBS (QL fido BBS 2:257/67) +44(0)1442-828255
mailto:[EMAIL PROTECTED] http://www.firshman.demon.co.uk
Voice: +44(0)1442-828254 Fax: +44(0)1442-828255
TF Services, 29 Longfield Road, TRING, Herts, HP23 4DG