Hi Malcolm
The answer is 6.5 Volts at 500mA. The connections, are pin(inner connection) positive, and the ring(outer connection) negative. An original power supply seems to give less than the 6.5 volts it says on the case, typical output is around 6.25 volts. There is diodeD23) protection against reversed connection. But I do not know if this is on all versions of the Z88, so be careful. Ian Burkinshaw -----Original Message----- From: Malcolm Cadman [mailto:[EMAIL PROTECTED]] Sent: 24 June 2002 18:45 To: [EMAIL PROTECTED] Subject: [ql-users] Z88 question I acquired a Z88 recently. Does anyone know the polarity and amperage of the DC/mains connection ? -- Malcolm Cadman Please visit us at http://www.sonybiz.net **************************************************************************** The information contained in this message or any of its attachments may be confidential and is intended for the exclusive use of the addressee(s). Any disclosure, reproduction, distribution or other dissemination or use of this communication is strictly prohibited without the express permission of the sender. The views expressed in this email are those of the individual and not necessarily those of Sony or Sony affiliated companies. Sony email is for business use only. This email and any response may be monitored by Sony United Kingdom Limited. ****************************************************************************
