Concerning "How can I check, if I use the actual source, is there something
like a source ident number ? QMS shows the version 1.6.0.pre. now."
I recommend to use TortoiseHg to handle all the repository stuff. This will
show you a graph of all revisions. And handle all hg commands via GUI.
Am Wednesday 06 January 2016, 18:16:32 schrieb apschwimmer:
> Hello Oliver,
>
>
> I recompiled QMS using
>
> hg pull
> hg update
>
> make
> make install
>
>
> but I have the same problem, I can't see any folders in mysql db myname
> in QMS appliction.
>
>
> Further I start QMS with option -d and received:
>
> QSqlError("1146", "QMYSQL: Unable to execute query",
> 'myname.folder2folder' doesn't exist")
>
>
>
> Here's the complete log until error message
>
> qmapshack -d
> 2016-01-06 17:54:19.956 [debug] "GDAL_DATA directory set to "
> 2016-01-06 17:54:19.956 [debug] "PROJ_LIB directory set to "
> 2016-01-06 17:54:20.007 [debug] Application ID: 1909280421
> 2016-01-06 17:54:20.016 [debug] "ROUTINO file is
> /usr/share/routino/profiles.xml"
> 2016-01-06 17:54:20.017 [debug] "ROUTINO file is
> /usr/share/routino/translations.xml"
> 2016-01-06 17:54:20.059 [debug] config
> dir "/home/acki/.config/QLandkarte/WaypointIcons"
> 2016-01-06 17:54:20.133 [debug] config
> dir "/home/acki/.config/QLandkarte"
> 2016-01-06 17:54:21.160 [debug] model: "" vendor: ""
> 2016-01-06 17:54:21.166 [debug] model: "" vendor: ""
> 2016-01-06 17:54:21.174 [debug] model: "" vendor: ""
> 2016-01-06 17:54:21.189 [debug] model: "ST500LT012-1DG142" vendor: ""
> 2016-01-06 17:54:26.082 [warning] Execution of SQL-Statement ` "SELECT
> COUNT(*) FROM folder2folder WHERE parent=:id" ` failed:
> 2016-01-06 17:54:26.082 [warning] QSqlError("1146", "QMYSQL: Unable to
> execute query", "Table 'myname.folder2folder' doesn't exist")
>
> I find out that I can switch to some other branches on https://bitbucke
> t.org/maproom/qmapshack/src
>
> -default
> -V1.x
> -databases
> - ...
>
>
> To be honest I'm not sure if I did everything right.
>
> I only use "default" until now, is this ok ?
>
> How can I check, if I use the actual source, is there something like a
> source ident number ? QMS shows the version 1.6.0.pre. now.
>
> Perhaps I can find some further information how to work with this branch ?
>
>
>
> Kind regards
>
> Axel
>
>
>
>
>
>
>
> On Di, 2016-01-05 at 19:25 +0000, qlandkartegt-users-
>
> [email protected] wrote:
> > Send Qlandkartegt-users mailing list submissions to
> >
> > [email protected]
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> >
> > https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
> >
> > or, via email, send a message with subject or body 'help' to
> >
> > [email protected]
> >
> > You can reach the person managing the list at
> >
> > [email protected]
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of Qlandkartegt-users digest..."
> >
> >
> > Today's Topics:
> >
> > 1. Using mysql in QMS (AP)
> > 2. Re: Using mysql in QMS (Oliver Eichler)
> > 3. Compiling QMS for Windows (was: QMapShack/Routino link
> > error
> > (Windows)) (WT)
> > 4. Re: Database change - "mysql.jpg" yEnc (Emanuel Hudl)
> > 5. Re: Database change (Emanuel Hudl)
> > 6. Re: Database change - "qms.jpg" yEnc (Emanuel Hudl)
> >
> >
> > -------------------------------------------------------------------
> > ---
> >
> > Message: 1
> > Date: Fri, 1 Jan 2016 18:46:09 +0100
> > From: AP <[email protected]>
> > Subject: [Qlandkartegt-users] Using mysql in QMS
> > To: [email protected]
> > Message-ID: <[email protected]>
> > Content-Type: text/plain; charset=windows-1252; format=flowed
> >
> > Dear All,
> >
> >
> > meanwhile I compiled QMS 1.5.1 following the tutorial
> >
> > https://bitbucket.org/maproom/qmapshack/src
> >
> > As mentioned before I created a mysql db "myname".
> >
> > I created a db in QMS with the same name by using the menue with
> > mysql
> > instead sqlite.
> >
> > The db appears in QMS menue "data".
> >
> > But if I try to create a folder "Tours" , the folder do not appears
> > in
> > the db in QMS.
> >
> > Using phpmyadmin I can see the db myname and the folder "Tours".
> >
> > What's wrong ?
> >
> > Kind regards
> >
> > Axel
> >
> >
> >
> > ------------------------------ Message: 3 Date: Thu, 31 Dec 2015
> > 16:56:20 +0100 From: AP <[email protected]> Subject: Re:
> > [Qlandkartegt-users] Qlandkartegt-users Digest, Vol 84, Issue 8 To:
> > [email protected] Message-ID:
> > <[email protected]> Content-Type: text/plain;
> > charset=windows-1252; format=flowed Hallo Oliver, I'm not very
> > fimilar
> > with mysql but would be glad to help a little bit. I created a db
> > with
> > the name "myname" and can access it as a user. But I don't know how
> > to
> > deal with it from QMS side. How can I use a mysql-db in QMS 5.5.1 in
> > Arch Linux ? Kind regards Axel Am 22.12.2015 um 15:09 schrieb Oliver
> >
> > Eichler:
> > > > > hi,
> > > > >
> > > > > there has been another change in the database that needs
> > > > > migration of
> > > > > the database. Please backup your database and report errors.
> > > > >
> > > > > As you might have noticed QMapShack is supporting MySql now. To
> > > > > use
> > > > > MySql you need a database server and a user login to that
> > > > > server. On the
> > > > > database sever you have to create a database by:
> > > > >
> > > > > create database myname;
> > > > >
> > > > > This will create the database with name "myname". In
> > > > > QMapShack's
> > > > > database setup dialog you have to use that name.
> > > > >
> > > > > The challenge with using a MySql server is having multiple
> > > > > instances of
> > > > > QMapShack using the same database. This will create conflicts
> > > > > when
> > > > > inserting/updating items from different instances. I spent
> > > > > quite some
> > > > > efforts to catch all these conflicts. But you never know. Thus
> > > > > if you
> > > > > experience some peculiar behaviour please report.
> > > > >
> > > > >
> > > > > The next step will be a mechanism to manually/automatically
> > > > > update the
> > > > > database tree and the workspace.
> > > > >
> > > > >
> > > > > It would be nice if enough users test and challenge that
> > > > > feature before
> > > > > the next release.
> > > > >
> > > > > Oliver
> > > > >
> > > > > -------------------------------------------------------------
> > > > > -----------------
> > > > > _______________________________________________
> > > > > Qlandkartegt-users mailing list
> > > > > [email protected]
> > > > > https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Fri, 01 Jan 2016 19:12:45 +0100
> > From: Oliver Eichler <[email protected]>
> > Subject: Re: [Qlandkartegt-users] Using mysql in QMS
> > To: [email protected]
> > Message-ID: <16701937.S9x7W6culu@linux-12kj>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > That was fast. You found a bug. Please test with latest version in
> > the
> > repository.
> >
> >
> > Thanks
> >
> > Oliver
> >
> > Am Friday 01 January 2016, 18:46:09 schrieb AP:
> > > Dear All,
> > >
> > >
> > > meanwhile I compiled QMS 1.5.1 following the tutorial
> > >
> > > https://bitbucket.org/maproom/qmapshack/src
> > >
> > > As mentioned before I created a mysql db "myname".
> > >
> > > I created a db in QMS with the same name by using the menue with
> > > mysql
> > > instead sqlite.
> > >
> > > The db appears in QMS menue "data".
> > >
> > > But if I try to create a folder "Tours" , the folder do not appears
> > > in
> > > the db in QMS.
> > >
> > > Using phpmyadmin I can see the db myname and the folder "Tours".
> > >
> > > What's wrong ?
> > >
> > > Kind regards
> > >
> > > Axel
> > >
> > >
> > >
> > > ------------------------------ Message: 3 Date: Thu, 31 Dec 2015
> > > 16:56:20 +0100 From: AP <[email protected]> Subject: Re:
> > > [Qlandkartegt-users] Qlandkartegt-users Digest, Vol 84, Issue 8 To:
> > > [email protected] Message-ID:
> > > <[email protected]> Content-Type: text/plain;
> > > charset=windows-1252; format=flowed Hallo Oliver, I'm not very
> > > fimilar
> > > with mysql but would be glad to help a little bit. I created a db
> > > with
> > > the name "myname" and can access it as a user. But I don't know how
> > > to
> > > deal with it from QMS side. How can I use a mysql-db in QMS 5.5.1
> > > in
> > > Arch Linux ? Kind regards Axel Am 22.12.2015 um 15:09 schrieb
> > > Oliver
> > >
> > > Eichler:
> > > > > > hi,
> > > > > >
> > > > > > there has been another change in the database that needs
> > > > > > migration of
> > > > > > the database. Please backup your database and report errors.
> > > > > >
> > > > > > As you might have noticed QMapShack is supporting MySql now.
> > > > > > To use
> > > > > > MySql you need a database server and a user login to that
> > > > > > server. On the
> > > > > > database sever you have to create a database by:
> > > > > >
> > > > > > create database myname;
> > > > > >
> > > > > > This will create the database with name "myname". In
> > > > > > QMapShack's
> > > > > > database setup dialog you have to use that name.
> > > > > >
> > > > > > The challenge with using a MySql server is having multiple
> > > > > > instances of
> > > > > > QMapShack using the same database. This will create conflicts
> > > > > > when
> > > > > > inserting/updating items from different instances. I spent
> > > > > > quite some
> > > > > > efforts to catch all these conflicts. But you never know.
> > > > > > Thus if you
> > > > > > experience some peculiar behaviour please report.
> > > > > >
> > > > > >
> > > > > > The next step will be a mechanism to manually/automatically
> > > > > > update the
> > > > > > database tree and the workspace.
> > > > > >
> > > > > >
> > > > > > It would be nice if enough users test and challenge that
> > > > > > feature before
> > > > > > the next release.
> > > > > >
> > > > > > Oliver
> > > > > >
> > > > > > -----------------------------------------------------------
> > > > > > -------------
> > > > > > ------ _______________________________________________
> > > > > > Qlandkartegt-users mailing list
> > > > > > [email protected]
> > > > > > https://lists.sourceforge.net/lists/listinfo/qlandkartegt-use
> > > > > > rs
> > >
> > > -----------------------------------------------------------------
> > > -----------
> > > -- _______________________________________________
> > > Qlandkartegt-users mailing list
> > > [email protected]
> > > https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
> >
> > ------------------------------
> >
> > Message: 3
> > Date: Sat, 2 Jan 2016 13:14:23 +0000 (UTC)
> > From: WT <[email protected]>
> >
> > Subject: [Qlandkartegt-users] Compiling QMS for Windows (was:
> > QMapShack/Routino link error (Windows))
> >
> > To: [email protected]
> > Message-ID: <[email protected]>
> > Content-Type: text/plain; charset=us-ascii
> >
> > The linker error problem was solved and all questions concerning this
> > error
> > found an answer with Helmut's help (thank you again!). I finally
> > compiled
> > the Windows version of QMapShack from source on a 64-bit machine with
> > Windows 7 Professional, SP 1. I tested this QMS with some of my
> > typical
> > actions - everything looks good.
> >
> > Here are some remarks and comments about the used procedure and its
> > possible
> > bottlenecks:
> >
> > - In some steps BAT-files have to be executed. I did this in a normal
> > command line window started from cmd.exe.
> >
> > - Be sure to have the correct 64-bit development packages installed
> > as
> > indicated in Helmut's description.
> >
> > - QMS for windows is now supported as 64-bit program. Thus in all
> > steps
> > described in Helmut's document be sure to have the proper 64-bit
> > development
> > environment selected. The compiler packages normally support 32- as
> > well as
> > 64-bit projects on 32- and 64-bit machines! Check this in the cmake-
> > gui with
> > "Grouped" and "Advanced" both checked and in Visual studio properties
> > and
> > solution platform and look for 32- or 64-bit entries.
> >
> > - On my machine MinGW (without 64!) was already installed before
> > trying to
> > compile QMS. Comments on the MinGW homepage are ambiguous in what
> > concerns
> > the possibility of using it for 64-bit compilations too. This was my
> > failure
> > and the reason for the linker error! After switching to MinGW64 as
> > proposed
> > all the compilation steps could be carried out without problems.
> >
> > - During the compilation of almost any package compiler warnings
> > appear. I
> > simply ignored these warnings (under which circumstances is it
> > recommended
> > to pay attention to these warnings?).
> >
> > - There might be some trouble when using '"' to deliminate required
> > path
> > settings in configuration scripts. Don't use this deliminator. Use
> > only
> > directory names without spaces (and propably non-ASCII characters).
> >
> > - Visual studio creates some irritating program menu entries. Use
> > "Visual
> > studio 2013" and not "Microsoft Visual studio ..."!
> >
> > - cmake-gui: call help to find what to do as first steps. Don't
> > forget to
> > select correct development environment (lower part of the window) and
> > set
> > correct paths in upper 2 edit fields.
> >
> > - Select the proper build type ("Release") in cmake-gui and/or Visual
> > studio.
> >
> > - QMS\nsi\copyfiles.bat:
> > - copy %QMSI_QT_PATH%\bin\icudt53.dll and similar commands had to
> > be
> > replaced with copy %QMSI_QT_PATH%\bin\icudt54.dll (use of Qt5.5 - in
> > my 5.5
> > installation there are no *53.dll files!)
> >
> > - I used Visual Studio Community 2013 - the installation procedure
> > downloads
> > more than 2 GB!
> >
> > - msys/MinGW64:
> > - Install msys before installing MinGW64
> > - Installation of MinGW64 with win-builds-1.5.0:
> > - after some automatic steps running in a cmd-window the "Win-
> > builds
> > installation" windows appears
> > - choose "Cygwin or MSYS"
> > - choose x86_64
> > - enter c:\msys as MSYS installation directory (if appropriate)
> > - press Ok
> > - in the next window click "Process" (upper right corner -
> > difficult
> > to identify!) - only now the necessary software will be downloaded
> > and
> > installed within the msys directory
> > - close window at the end of the installation process (100%
> > reached,
> > click on x in upper right corner of window)
> > - the \msys\opt directory is created by this installer. It
> > contains
> > MinGW64
> >
> > - make.exe: use msys\bin\make.exe. In my case it was not in the PATH.
> > I
> > therefore modified the following nsi\build_routino.bat part
> >
> > rem add mingw64 toolchain to PATH
> > set
> > PATH=c:\msys\bin\;c:\msys\opt\windows_64\bin\;%PATH%
> > rem set PATH=C:\msys\opt\windows_64\bin;%PATH%
> >
> > Regards
> >
> > Wolfgang
> >
> >
> >
> >
> >
> >
> > ------------------------------
> >
> > Message: 4
> > Date: Tue, 5 Jan 2016 19:23:56 +0000 (UTC)
> > From: Emanuel Hudl <[email protected]>
> > Subject: Re: [Qlandkartegt-users] Database change - "mysql.jpg" yEnc
> > To: [email protected]
> > Message-ID: <[email protected]>
> > Content-Type: text/plain; charset=UTF-8
> >
> > =ybegin part=1 line=128 size=292343 name=mysql.jpg
> > =ypart begin=0 end=5
> > ))=J*
> > =yend size=5 part=1 pcrc32=0f4066e6
> >
> >
> >
> >
> >
> > ------------------------------
> >
> > Message: 5
> > Date: Tue, 5 Jan 2016 19:23:56 +0000 (UTC)
> > From: Emanuel Hudl <[email protected]>
> > Subject: Re: [Qlandkartegt-users] Database change
> > To: [email protected]
> > Message-ID: <[email protected]>
> > Content-Type: text/plain; charset=UTF-8
> >
> > hello oliver,
> >
> > i need your help. as my provider offers only one mysql database (yes
> > i
> > know that's poor) i want to test it on localhost. So seeting up the
> > enviroment (apache2, php5 and mysql 5.5.46) is no problem (i tested
> > with
> > a local wordpress installation).
> >
> > My steps:
> > Create database via phpmyadmin called "Touren"
> > Creating a mysql Database named Touren
> > when i try to add a folder, nothing happens, but when i look into
> > the
> > mysql database, there is written:
> >
> > Diese Tabelle enth?lt keine eindeutige ("unique") Spalte. Gitter-
> > Bearbeitungsfunktion, Kontrollk?stchen, Bearbeiten, Kopieren und
> > L?schen
> > von Links sind nicht verf?gbar.
> >
> > SELECT *
> > FROM `versioninfo`
> > LIMIT 0 , 30
> >
> > Version type
> > 4 QMapShack
> >
> > Any hints? I read the post above "using mysql in QMS", put i stuck.
> > I
> > compiled lastet version, 1.6.0pre
> >
> > I added some screenshots and the localhost.sql
> > Thanks!
> >
> > Am Tue, 22 Dec 2015 15:09:53 +0100 schrieb Oliver Eichler:
> > > hi,
> > >
> > > there has been another change in the database that needs migration
> > > of
> > > the database. Please backup your database and report errors.
> > >
> > > As you might have noticed QMapShack is supporting MySql now. To use
> > > MySql you need a database server and a user login to that server.
> > > On the
> > > database sever you have to create a database by:
> > >
> > > create database myname;
> > >
> > > This will create the database with name "myname". In QMapShack's
> > > database setup dialog you have to use that name.
> > >
> > > The challenge with using a MySql server is having multiple
> > > instances of
> > > QMapShack using the same database. This will create conflicts when
> > > inserting/updating items from different instances. I spent quite
> > > some
> > > efforts to catch all these conflicts. But you never know. Thus if
> > > you
> > > experience some peculiar behaviour please report.
> > >
> > >
> > > The next step will be a mechanism to manually/automatically update
> > > the
> > > database tree and the workspace.
> > >
> > >
> > > It would be nice if enough users test and challenge that feature
> > > before
> > > the next release.
> > >
> > > Oliver
> >
> > -------------------------------------------------------------------
> > -----------
> >
> >
> >
> >
> >
> >
> > ------------------------------
> >
> > Message: 6
> > Date: Tue, 5 Jan 2016 19:23:56 +0000 (UTC)
> > From: Emanuel Hudl <[email protected]>
> > Subject: Re: [Qlandkartegt-users] Database change - "qms.jpg" yEnc
> > To: [email protected]
> > Message-ID: <[email protected]>
> > Content-Type: text/plain; charset=UTF-8
> >
> > =ybegin part=1 line=128 size=19259 name=qms.jpg
> > =ypart begin=0 end=5
> > ))=J*
> > =yend size=5 part=1 pcrc32=0f4066e6
> >
> >
> >
> >
> >
> > ------------------------------
> >
> > -------------------------------------------------------------------
> > -----------
> >
> >
> > ------------------------------
> >
> > _______________________________________________
> > Qlandkartegt-users mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
> >
> >
> > End of Qlandkartegt-users Digest, Vol 85, Issue 3
> > *************************************************
>
> ----------------------------------------------------------------------------
> -- _______________________________________________
> Qlandkartegt-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
------------------------------------------------------------------------------
_______________________________________________
Qlandkartegt-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
