Hi Rui,
ok, now I understand your problem. It's easy to fix. You minimized the splitter
view too much and it deflated completely. Switch to the track edit dialog as
usual.
Right at the bottom at the middle of the map view you should see a difference
in
the frame. If you move your mouse over this spot it should change to an up/down
cursor. If it does press the left mouse and move it up. By that the splitter
view will
open again.
HTH
Oliver
Am Freitag, 8. Dezember 2017, 22:33:48 CET schrieben Sie:
> I put down what Ivo Reano [[email protected]] write about that
>
>
>
> To assign the elevation data to a track, in addition to assigning a DEM file
> to the map, you must access the track "edit" window and then use the
> "replace elevation data" function.
>
>
>
> The DEM file is on the map because it shows on de images (bottom on
> pictures)
>
>
>
> That's the part you must access the track "edit" window and then use the
> "replace elevation data" function I cant do. It dont show up anymore….
>
>
>
> RJ
>
>
>
>
>
> De: RJ ASUS [mailto:[email protected]]
> Enviada: sexta-feira, 8 de dezembro de 2017 22:27
> Para: 'Oliver Eichler'
> Assunto: RE: [Qlandkartegt-users] Help Wanted - Assign DEM to a GPS file
> Importância: Alta
>
>
>
> Hi Oliver
>
>
>
> Regarding your question, not mixed with other sw.
>
>
>
> I'll try to further explain my issue.
>
>
>
> When preparing a hike I use OSM maps to draw by hand the track, using Garmin
> sw MapSource or Basecamp, thus ending up with a gpx file with no altitude
> data. That’s because sometimes I want to know the altimetry before going
> outside.
>
>
>
> I send you the file attached, but also tried with others with no success.
>
>
>
> If you cloud try to put altitude data with qlandkart, there should be a step
> I cannot do because it don’t show on my system, but you probably will.
>
>
>
> What I used do is until last week is
>
>
>
> load the gpx file in QlandKarte (Load Geo Data)
>
>
>
> I'll get the following image (map has altitude data but the
> track don’t (all blue on the bottom left)
>
>
>
>
>
>
>
>
>
> Then I click left on tab "track" followed by a right-click which shows the
> menu you can see.
>
>
>
>
>
>
>
> Then I click "Edit" and nothing shows up. I get the following screen.
>
>
>
>
>
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Qlandkartegt-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/qlandkartegt-users
