Nothing, its the same:
deferral: Unable_to_open_/var/qmail/maildirs/
kare2:_is_a_directory._(#4.2.1)/
This is the ldap's kare2 users:
shuhi:/var/qmail# /var/qmail/bin/qmail-ldaplookup -d 255 -m
[EMAIL PROTECTED]
Searching ldap for: (&(objectClass=qmailUser)(|
([EMAIL PROTECTED])([EMAIL PROTECTED])))
under dn: dc=example,dc=com
Found 1 entry:
dn: [EMAIL PROTECTED],dc=example,dc=com
-------------------------------------------------------
objectClass: person
objectClass: top
objectClass: inetOrgPerson
objectClass: qmailUser
mail: [EMAIL PROTECTED]
uid: [EMAIL PROTECTED]
accountStatus: active
mailHost: smtp.example.com
homeDirectory: /var/qmail/maildirs/kare2
aliasEmpty: /var/qmail/maildirs/kare2
qmailDotMode: ldaponly
qmailUID: 11184
qmailGID: 2110
mailQuotaSize: 1000000
mailQuotaCount: 1000
mailSizeMax: 0 (unlimited)
deliveryMode: noprogram
mailReplyText: undefined
And it was create with the next attributes:
shuhi:/var/qmail# cat /tmp/user.ldif
dn: [EMAIL PROTECTED],dc=example,dc=com
cn: kare2
sn: kare2
objectClass: person
objectClass: top
objectClass: inetOrgPerson
objectClass: qmailUser
o: example
uid: [EMAIL PROTECTED]
mail: [EMAIL PROTECTED]
mailHost: smtp.example.com
homeDirectory: /var/qmail/maildirs/kare2
mailMessageStore: /var/qmail/maildirs/kare2
userPassword: 123456
deliveryMode: noprogram
accountStatus: Active
ldapadd -x -H ldap://localhost/ -D "cn=admin,dc=example,dc=com" -W -
f /tmp/user.ldif
And now, send a mail to kare2:
#echo To: [EMAIL PROTECTED] | /var/qmail/bin/qmail-inject
And the log:
@40000000433f09da0e33a49c info msg 811919: bytes 206 from
<[EMAIL PROTECTED]> qp 6269 uid 0
@40000000433f09da0f1e6a2c starting delivery 193: msg 811919 to local
[EMAIL PROTECTED]
@40000000433f09da0f2090f4 status: local 1/10 remote 0/20
@40000000433f09da115bee7c delivery 193: deferral: Unable_to_open_/
var/qmail/maildirs/kare2:_is_a_directory._(#4.2.1)/
I have used the normal /var/qmail/bin/dirmaker and this:
#!/bin/sh
mkdir -m 700 -p $1
/var/qmail/bin/maildirmake $1/Maildir
chown -R vmail:vmail $1
chmod -R 700 $1
But the dir is ok:
# ls -l /var/qmail/maildirs/
total 24
drwx------ 3 vmail vmail 4096 2005-10-01 18:20 anata
drwx------ 3 vmail vmail 4096 2005-10-01 18:20 anata2
drwx------ 3 vmail vmail 4096 2005-10-01 18:23 anata3
drwx------ 3 vmail vmail 4096 2005-10-02 00:08 kare
drwx------ 3 vmail vmail 4096 2005-10-02 00:12 kare2
drwx------ 3 vmail vmail 4096 2005-10-01 18:20 watashi3
# ls -l /var/qmail/maildirs/kare2/
total 4
drwx------ 5 vmail vmail 4096 2005-10-01 18:20 Maildir
# ls -l /var/qmail/maildirs/kare2/Maildir/
total 12
drwx------ 2 vmail vmail 4096 2005-10-01 18:20 cur
drwx------ 2 vmail vmail 4096 2005-10-01 18:20 new
drwx------ 2 vmail vmail 4096 2005-10-01 18:20 tmp
Where can the problem be ?
This is my /etc/ldap/slapd.conf:
# cat /etc/ldap/slapd.conf
# This is the main slapd configuration file. See slapd.conf(5) for more
# info on the configuration options.
###################################################################### #
# Global Directives:
# Features to permit
#allow bind_v2
# Schema and objectClass definitions
include /etc/ldap/schema/core.schema
include /etc/ldap/schema/cosine.schema
include /etc/ldap/schema/nis.schema
include /etc/ldap/schema/inetorgperson.schema
include /etc/ldap/schema/qmail.schema
# Schema check allows for forcing entries to
# match schemas for their objectClasses's
schemacheck on
# Where the pid file is put. The init.d script
# will not stop the server if you change this.
pidfile /var/run/slapd/slapd.pid
# List of arguments that were passed to the server
argsfile /var/run/slapd.args
# Read slapd.conf(5) for possible values
loglevel 0
# Where the dynamically loaded modules are stored
modulepath /usr/lib/ldap
moduleload back_ldbm
###################################################################### #
# Specific Backend Directives for ldbm:
# Backend specific directives apply to this backend until another
# 'backend' directive occurs
backend ldbm
###################################################################### #
# Specific Directives for database #1, of type ldbm:
# Database specific directives apply to this databasse until another
# 'database' directive occurs
database ldbm
suffix "dc=example,dc=com"
#suffix "o=example"
directory "/var/lib/ldap"
index objectClass eq
rootdn "cn=admin,dc=example,dc=com"
rootbinddn "cn=admin,dc=example,dc=com"
#rootpw {SSHA}4162+KLfc6cKgOg7g6Os0lnfVKk6bHa8
rootpw 1234
If a comment the rootpw directive i get the next error:
@40000000433f0e7a181707c4 info msg 811843: bytes 206 from
<[EMAIL PROTECTED]> qp 6326 uid 0
@40000000433f0e7a19025ddc starting delivery 207: msg 811843 to local
[EMAIL PROTECTED]
@40000000433f0e7a190484a4 status: local 1/10 remote 0/20
@40000000433f0e7a1a2c14b4 delivery 207: deferral:
Unable_to_login_into_LDAP_server,_bad_credentials._(#4.4.3)/
@40000000433f0e7a1a2c37dc status: local 0/10 remote 0/20
So i put uncoment.
I dont think that the error is in slapd.conf, because, before
(now no) if i created user/Maildir, it run, so i thinks the server
is good, maybe a bad configuration with user definition or, Makefile
of qmail-1.03 source i dont know, in Makefile i have do:
LDAPLIBS=-L/usr/local/lib -lldap -llber -lresolv (añadir -lresolv
que no estaba).
MDIRMAKE=DAUTOMAILDIRMAKE
HDIRMAKE=DAUTOHOMEDIRMAKE
And in qmail-ldap.h:
# cat /usr/local/src/qmail-1.03/qmail-ldap.h |grep LDAP_HOMEDIR
#define LDAP_HOMEDIR "mailMessageStore"
Thanks and regards.
Layn.
Hi,
The 'accountStatus' attribute is missing from your user data
output. For
this account to be operational, the following attribute must be set
for
every mail user. You must include this attribute:value pair in the
base ldif
file that you create for every system user -
accountStatus: Active
The accountStatus attribute comes as a part of qmail schema. Have you
included qmail.schema directive in /etc/openldap/slapd.conf ? If
not, you
have to define the following in slapd.conf
include /etc/openldap/schema/qmail.schema
Along with that, copy the file qmail.schema to /etc/openldap/schema/
Finally, send a mail to this newly created user. I am sure it will
work.
Regards,
Amit
----- Original Message ----- From: "Layn" <[EMAIL PROTECTED]>
To: <qmail-ldap@qmail-ldap.org>
Sent: Saturday, October 01, 2005 9:54 PM
Subject: Re: Automaildir.
Thansk for your faster reply, now the directory is created:
drwx------ 3 vmail vmail 4096 2005-10-01 18:20 anata
This directory is empty, no Maildir, no cur, no new, no tmp...
And the log say:
deferral:
Unable_to_open_/var/qmail/maildirs/anata2:_is_a_directory._(#4.2.1)
If manually i do the Maildir directory the answer is the same:
deferral:
Unable_to_open_/var/qmail/maildirs/anata2:_is_a_directory._(#4.2.1)
The anata user:
dn: uid=anata2,dc=example,dc=com
cn: anata2
sn: anata2
objectClass: person
objectClass: top
objectClass: inetOrgPerson
objectClass: qmailUser
o: example
uid: anata2
mail: [EMAIL PROTECTED]
mailHost: smtp.example.com
homeDirectory: /var/qmail/maildirs/anata2
mailMessageStore: /var/qmail/maildirs/anata2
userPassword: 123456
Regards,
Layn.
Hi Layn,
Solution is quite simple - I'll just point it out one by one
1. In your qmail-1.03 source directory, locate the file 'qmail-
ldap.h'.
2. In this file, locate the parameter 'LDAP_HOMEDIR' and change
its value
to
'mailMessageStore'
3. Now go to the qmail source directory and recompile qmail-ldap
with the
command -
make setup check
4. In the directory /var/qmail/control, make sure u have the
following
control files with the contents given along with this...
(I) ldapserver - localhost
(II) ldaplogin - 'cn=Manager,dc=yourdomain,dc=com'
(III) ldappassword - 'yoursecretpassword'
(IV) ldapbasedn - 'dc=yourdomain,dc=com'
(V) ldaplocaldelivery - 1
(VI) make sure localdomains and rcpthosts contain the name of ur
domain
5. chown root:qmail /var/qmail/control/ldap*
Also make sure that your /etc/ldap.conf has enabled
authentication for
the
domain manager i.e cn=Manager,dc=yourdomain,dc=com...Locate related
entries
in this file and make changes accordingly...
rootbinddn cn=Manager,dc=yourdomain,dc=com
Also uncomment the entry for password
Now, when you create a new user, qmail will automatically create the
user's
home directory, which is also the maildir of user 'watashi' (
/var/qmail/maildirs/watashi. ). So the directory 'watashi' will be
created
as a maildir and not a mailbox directory.
In case the maildir is not created, just send a mail to this newly
created
user 'watashi' with any demo text. qmail will then automatically
create
the
desired maildir.
Hope that helps. Good luck with your qmail-ldap installation.
Regards,
Amit
----- Original Message ----- From: "Layn" <[EMAIL PROTECTED]>
To: <qmail-ldap@qmail-ldap.org>
Sent: Saturday, October 01, 2005 8:49 PM
Subject: Automaildir.
I know this is a comun problem, i have read similar post in this
list and anothers, but, i cant fix this error. So please if you
have any
idea about its, please tell me.
My problem is the next:
When i send a mail to a local users (no sistem local, local of my
domains, defined in my ldap), i get the next error:
deferral:
Unable_to_switch_to_/var/qmail/maildirs/
watashi3:_file_does_not_exist._(#4.
3
.0)
If i create this directory:
shuhi:/var/qmail# bin/dirmaker maildirs/watashi3
shuhi:/var/qmail# chown -R vmail:vmail maildirs
shuhi:/var/qmail# ls -l maildirs/
total 4
drwx------ 2 vmail vmail 4096 2005-10-01 16:53 watashi3
The result is:
deferral: Unable_to_chdir_to_maildir._(#4.2.1)
It could be a problem of privilege, but if u see, the
directory is
of vmail:vmail, so its correct, no problem with privilege.
And now i create Maildir with maildirmake:
shuhi:/var/qmail# bin/maildirmake maildirs/watashi3/Maildir
shuhi:/var/qmail# chown -R vmail:vmail maildirs
The result is:
success: did_1+0+0/
Correct!!! But no automatic.
The ldap's user configuration is:
dn: uid=watashi3,dc=example,dc=com
cn: watashi3
sn: lin2
objectClass: person
objectClass: top
objectClass: inetOrgPerson
objectClass: qmailUser
o: example
uid: watashi3
mail: [EMAIL PROTECTED]
mailHost: smtp.example.com
mailMessageStore: /var/qmail/maildirs/watashi3
userPassword:: 123456
If i put the homeDirectory's attribute, and i create the
homeDirectory,
this automaty crea the mailbox, but the mailbox and i want
maildir, no
mailbox.
Control's files of interest:
defaultdelivery ./Maildir/
ldapgid 2110 (vmail uid)
ldapmessagestore /var/qmail/maildirs
ldapobjectclass qmailUser
ldaprebind 1
ldapuid 11184 (vmail gid=
dirmaker /var/qmail/bin/dirmaker
And dirmaker's script:
#!/bin/sh
mkdir -m 700 -p $1
And for last, the more important, the Makefile of qmail-1.03, in
this
file i have uncommentd the next lines:
MDIRMAKE=DAUTOMAILDIRMAKE
HDIRMAKE=DAUTOHOMEDIRMAKE
I hope you can help me i dont know where to read now.
Thanks and regards,
Layn.
