Many thanks to Alain Wolf and Peter Miller.
My /service/smtpd/tcp now looks like this. And I have ran make to produce the
corrected version of tcp.cdb
127.:allow,RELAYCLIENT=""
192.168.1.17:allow,RBL="",RCPTCHECK="",RELAYCLIENT="",SMTPAUTH="",QMAILQUEUE="/var/qmail/bin/simscan",NOP0FCHECK="1"
:allow,RCPTCHECK="",SMTPAUTH="",QMAILQUEUE="/var/qmail/bin/simscan",SENDERCHECK="STRICT",NOP0FCHECK="1"
>From my Nokia 9500 I am NOT able to send an email to gmail.com . I know the
>problem is tied up to my access configuration in slapd.conf !
It looks like this:
...
...
access to attr=userPassword
by self write
by anonymous auth
by dn.base="cn=hc_admin,o=Administrators,dc=example,dc=com" write
by * none
access to *
by self write
by dn.base="cn=hc_admin,o=Administrators,dc=example,dc=com" write
by * read
...
...
which produces this error in /service/smtpd/log/main/current:
@400000004701c5302f085dfc tcpserver: pid 10581 from SOME_IP_ADDRESS
@400000004701c5302f0a713c tcpserver: ok 10581
mailbox.example.com:192.168.1.222:25 :SOME_IP_ADDRESS::9855
@400000004701c5302f2edd74 qmail-smtpd 10581: connection from SOME_IP_ADDRESS
(unknown) to mailbox.example.com
@400000004701c5302f2f009c qmail-smtpd 10581: enabled options: starttls
sendercheck-strict rcptcheck smtp-auth qmailqueue /var/qmail/bin/simscan
@400000004701c53500319944 qmail-smtpd 10581: remote ehlo: [10.130.170.22]
@400000004701c5353984c504 qmail-smtpd 10581: auth login
@400000004701c53a245988cc qmail-smtpd 10581: authentication failed:
authentication failure
@400000004701c53a2459a03c
@400000004701c53e246661dc qmail-smtpd 10581: remote rset
@400000004701c53f29c8d4ac qmail-smtpd 10581: mail from: [EMAIL PROTECTED]
@400000004701c53f29c8f3ec qmail-smtpd 10581: sender verify, sender not in
goodmailaddr
@400000004701c53f29c9da64 qmail-smtpd 10581: sender verify, sender is local
@400000004701c53f2a0c0bb4 qmail-smtpd 10581: sender verify OK
@400000004701c5420088025c qmail-smtpd 10581: rcpt to: [EMAIL PROTECTED]
@400000004701c5420088cd7c qmail-smtpd 10581: no mail relay for 'rcpt to':
[EMAIL PROTECTED]
@400000004701c54232c039c4 qmail-smtpd 10581: quit, closing connection
@400000004701c54232cdbeb4 tcpserver: end 10581 status 0
The corresponding error in ldap.log is:
Oct 2 12:12:31 mailbox slapd[10569]: conn=2 fd=12 ACCEPT from
IP=127.0.0.1:42668 (IP=0.0.0.0:389)
Oct 2 12:12:31 mailbox slapd[10569]: conn=2 op=0 BIND dn="" method=128
Oct 2 12:12:31 mailbox slapd[10569]: conn=2 op=0 RESULT tag=97 err=0 text=
Oct 2 12:12:31 mailbox slapd[10569]: conn=2 op=1 SRCH base="dc=example,dc=com"
scope=2 deref=0 filter="(&(objectClass=qmailUser)([EMAIL PROTECTED]))"
Oct 2 12:12:31 mailbox slapd[10569]: conn=2 op=1 SRCH attr=accountStatus
userPassword
Oct 2 12:12:31 mailbox slapd[10569]: conn=2 op=1 SEARCH RESULT tag=101 err=0
nentries=1 text=
Oct 2 12:12:31 mailbox slapd[10569]: conn=2 op=2 UNBIND
Oct 2 12:12:31 mailbox slapd[10569]: conn=2 fd=12 closed
Oct 2 12:12:37 mailbox slapd[10569]: conn=3 fd=12 ACCEPT from
IP=127.0.0.1:42669 (IP=0.0.0.0:389)
Oct 2 12:12:37 mailbox slapd[10569]: conn=3 op=0 BIND dn="" method=128
Oct 2 12:12:37 mailbox slapd[10569]: conn=3 op=0 RESULT tag=97 err=0 text=
Oct 2 12:12:37 mailbox slapd[10569]: conn=3 op=1 SRCH base="dc=example,dc=com"
scope=2 deref=0 filter="(&(objectClass=qmailUser)(|([EMAIL PROTECTED])([EMAIL
PROTECTED])))"
Oct 2 12:12:37 mailbox slapd[10569]: conn=3 op=1 SRCH attr=accountStatus
Oct 2 12:12:37 mailbox slapd[10569]: conn=3 op=1 SEARCH RESULT tag=101 err=0
nentries=1 text=
Oct 2 12:12:40 mailbox slapd[10569]: conn=3 op=2 UNBIND
Oct 2 12:12:40 mailbox slapd[10569]: conn=3 fd=12 closed
To confirm that the access configuration in slapd.conf was the culprit, I
commented the access configuration lines in slapd.conf . And my email to
gmail.com went thru successfully. The log in /service/smtpd/log/main/current
looks like:
@400000004701c670330155bc tcpserver: pid 10599 from SOME_IP_ADDRESS
@400000004701c6703303595c tcpserver: ok 10599
mailbox.example.com:192.168.1.222:25 :SOME_IP_ADDRESS::25064
@400000004701c67033277f44 qmail-smtpd 10599: connection from SOME_IP_ADDRESS
(unknown) to mailbox.example.com
@400000004701c670332836dc qmail-smtpd 10599: enabled options: starttls
sendercheck-strict rcptcheck smtp-auth qmailqueue /var/qmail/bin/simscan
@400000004701c67b126a2a2c qmail-smtpd 10599: remote ehlo: [10.130.66.9]
@400000004701c67b33bddb74 qmail-smtpd 10599: auth login
@400000004701c67d2a959e74 qmail-smtpd 10599: authentication success, user
[EMAIL PROTECTED]
@400000004701c67f11472dfc qmail-smtpd 10599: remote rset
@400000004701c6800493d63c qmail-smtpd 10599: mail from: [EMAIL PROTECTED]
@400000004701c6800494998c qmail-smtpd 10599: sender verify, sender not in
goodmailaddr
@400000004701c6800494b4e4 qmail-smtpd 10599: sender verify, sender is local
@400000004701c68004dc220c qmail-smtpd 10599: sender verify OK
@400000004701c68035614e5c qmail-smtpd 10599: rcpt to: [EMAIL PROTECTED]
@400000004701c68035616d9c qmail-smtpd 10599: recipient verify, recipient not in
goodmailaddr
@400000004701c6812b80e4ec qmail-smtpd 10599: go ahead
@400000004701c6933276d0cc qmail-smtpd 10599: message queued: 1191298697 qp
10602 size 415 bytes
@400000004701c6960ab75304 qmail-smtpd 10599: quit, closing connection
@400000004701c6960abc023c tcpserver: end 10599 status 0
@400000004701c6960abc1d94 tcpserver: status: 0/40
and the corresponding ldap.log:
Oct 2 12:17:08 mailbox slapd[10594]: slapd starting
Oct 2 12:17:55 mailbox slapd[10594]: conn=0 fd=12 ACCEPT from
IP=127.0.0.1:42670 (IP=0.0.0.0:389)
Oct 2 12:17:55 mailbox slapd[10594]: conn=0 op=0 BIND dn="" method=128
Oct 2 12:17:55 mailbox slapd[10594]: conn=0 op=0 RESULT tag=97 err=0 text=
Oct 2 12:17:55 mailbox slapd[10594]: conn=0 op=1 SRCH base="dc=example,dc=com"
scope=2 deref=0 filter="(&(objectClass=qmailUser)([EMAIL PROTECTED]))"
Oct 2 12:17:55 mailbox slapd[10594]: conn=0 op=1 SRCH attr=accountStatus
userPassword
Oct 2 12:17:55 mailbox slapd[10594]: conn=0 op=1 SEARCH RESULT tag=101 err=0
nentries=1 text=
Oct 2 12:17:55 mailbox slapd[10594]: conn=0 op=2 UNBIND
Oct 2 12:17:55 mailbox slapd[10594]: conn=0 fd=12 closed
Oct 2 12:17:58 mailbox slapd[10594]: conn=1 fd=12 ACCEPT from
IP=127.0.0.1:42671 (IP=0.0.0.0:389)
Oct 2 12:17:58 mailbox slapd[10594]: conn=1 op=0 BIND dn="" method=128
Oct 2 12:17:58 mailbox slapd[10594]: conn=1 op=0 RESULT tag=97 err=0 text=
Oct 2 12:17:58 mailbox slapd[10594]: conn=1 op=1 SRCH base="dc=example,dc=com"
scope=2 deref=0 filter="(&(objectClass=qmailUser)(|([EMAIL PROTECTED])([EMAIL
PROTECTED])))"
Oct 2 12:17:58 mailbox slapd[10594]: conn=1 op=1 SRCH attr=accountStatus
Oct 2 12:17:58 mailbox slapd[10594]: conn=1 op=1 SEARCH RESULT tag=101 err=0
nentries=1 text=
Oct 2 12:17:59 mailbox slapd[10594]: conn=1 op=2 UNBIND
Oct 2 12:17:59 mailbox slapd[10594]: conn=1 fd=12 closed
Unfortunately I do not know how to correct the access configuration lines in
slapd.conf. Could someone show me how. TIA.
--
roger
---------------------------------------------------
Sign Up for free Email at http://ureg.home.net.my/
---------------------------------------------------
