On Sun, Jan 18, 2004 at 12:09:16PM +0100, Salvatore Toribio wrote: > I set up a server to be his first secondary with qmail-scanner but > without any scanner, then I found hundreds of mails with "no sender > and no recips" but at least the time for incoming mails get down to > 10 minutes. > > Return-Path: > From: "System Administrator" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Subject: Undeliverable: Eliminate Awful Headaches from a long night drinking > 18/01/2004 11:42:55:19075: w_c: elapsed time from start 0.019901 secs > 18/01/2004 11:42:55:19075: g_e_h: no sender and no recips. > 18/01/2004 11:42:55:19075: ------ Process 19075 finished. Total of > 0.032375 secs
You can see from the Return-Path: that there is no sender address - but the recip appears to be [EMAIL PROTECTED] - not "" - so I don't know why "g_e_h: no sender and no recips." is generated. What does your Qmail logs (not Q-S) say the recip is? The envelope sender/recip don't necessarily have any relationship to the From:/To: headers, so maybe it was sent to ""? Worst case, either Ethereal or recordio could be used to capture the "raw" SMTP stream, and then you should see for sure. -- Cheers Jason Haar Information Security Manager, Trimble Navigation Ltd. Phone: +64 3 9635 377 Fax: +64 3 9635 417 PGP Fingerprint: 7A2E 0407 C9A6 CAF6 2B9F 8422 C063 5EBB FE1D 66D1 ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Qmail-scanner-general mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/qmail-scanner-general
