I just read over your mail again and then noticed your comments inside the error lines. My bad.
It may sound silly but I'd try to put it way too high and see if it works at all. I'd thin uncommenting softlimit enables a default. I remember having those issues but mine were solved by upping the softlimit in submission. No box access now to check though :-/ Cheers, Sebastian > On 14.01.2014, at 18:33, "Wicus Roets" <wi...@r4c.co.za> wrote: > > Increasing the softlimit for the SMTP (port 25) from 20M to 65M worked. Noted > that on 64M it won’t work. > > Doing the exact same for the SUBMISSION (port 587) did not work. Had it up to > 200M and then finally uncommented the softlimit line, which still does not > allow it to work … > > From: Sebastian Grewe [mailto:sebast...@grewe.ca] > Sent: 14 January 2014 06:55 PM > To: qmailtoaster-list@qmailtoaster.com > Subject: ***SPAM*** Re: [qmailtoaster] No package compat-libf2c compat-libgcc > compat-libsdc++-33 available > > As for your issue: change the run file and increase the memory softlimit. > That should fix those memory issues. > > > > Cheers, > Sebastian > > On 14.01.2014, at 17:51, "Wicus Roets" <wi...@r4c.co.za> wrote: > > Hi, > > I’ve completed a NEW installation of qmailtoaster on a virtual Centos 6 > x86_64 server, though not without a few curve balls. > > Thanks to Dan, the only reason I have vqadmin working is as I could download > his compiled ...rpm after digging the archives. Attached is his “QMT-CentOS6” > script which I “extracted”& “fixed” from an old mail. ( As it isn’t on the > mirror4 or mirror9 sites any more) > > However, though all seems and looks fine at present, the following > dependencies failed when the cnt5064-deps.sh script was run during the > initial setup stages > > No package compat-libf2c available. > No package compat-libgcc available. > No package compat-libsdc++-33 available. > > Regardless, I soldiered on, as “rpm –qa | grep compat-“ reflected the > following packages on the system > > compat-gcc-34-c++-3...4.6-19.el6.x86_64 > compat-gcc-34-3.4.6-19.el6.x86_64 > compat-libstdc++-296-2.96-144.el6.i686 > compat-glibc-2.5-46...2.x86_64 > compat-libf2c-34-3.4.6-19.el6.x86_64 > compat-libstdc++-33-3.2.3-69.el6.x86_64 > compat-glibc-headers-2.5-46.2.x86_64 > > As mentioned, except for vqadmin, all the other packages compiled fine. > (vqadmin having been downloaded & installed as an rpm from Dan’s site) > > The final step though, being to implement qmailtoaster-plus. However, the > above dependencies are back to haunt me when I run “qtp-newmodel”, as seen > below > > qtp-dependencies v0.3.2 > qtp-install-rpmforge v0.4.0 - getting latest version of rpmforge-release ..... > qtp-install-rpmforge - rpmforge-release-0.5.3-1.el6.rf.x86_64 is installed, > upgrading to 0.5.3-1 > qtp-install-rpmforge - your distro/ver is not supported by RPMforge, exiting. > > qtp-dependencies - installing compat-libf2c compat-libgcc compat-libsdc++-33 > ..... > Loaded plugins: fastestmirror, presto > Loading mirror speeds from cached hostfile > * base: ftp.is.co.za > * centosplus: ftp.is.co.za > * extras: ftp.is.co.za > * rpmforge: ftp.is.co.za > * updates: ftp.is.co.za > Setting up Install Process > No package compat-libf2c available. > No package compat-libgcc available. > No package compat-libsdc++-33 available. > Error: Nothing to do > qtp-dependencies - installation of base dependencies failed, exiting > qtp-newmodel - dependent packages processing failed, exiting > > Instructions as per > http://qtp.qmailtoaster.com/trac/wiki/WikiStart#a1-InstallQTPRepository were > followed and the repositories I had added are > > Rpmforge > Qmailtoaster-plus > > > Though I expected a working qmail toaster, softlimits seems to be yet another > issue to deal with… IMAP (port 143) works. SMTP (port 25) & submission (port > 587) not… > > SMTP was resolved by changing the softlimit from 20M to 65M within > /var/log/qmail/smtp/run at the time /var/log/qmail/smtp/current log reflected > “/var/qmail/bin/qmail-smtpd: error while loading shared libraries: > libcrypt.so.1: failed to map segment from shared object: Cannot allocate > memory” > > However, with submission (port 587) changing or even uncommenting the > softlimit within /var/ qmail/supervise/submission/run had no effect and > /var/log/qmail/submission/current simply keeps on reflecting > “/var/qmail/bin/qmail-smtpd: error while loading shared libraries: > libselinux.so.1: failed to map segment from shared object: Cannot allocate > memory” with every send test. In earlier tests however, the log stated > “/var/qmail/bin/qmail-smtpd: error while loading shared libraries: > libmysqlclient.so.16: failed to map segment from shared object: Cannot > allocate memory” > > Virtual machine’s memory stats being > > total used free shared buffers cached > Mem: 1877 816 1060 0 27 297 > -/+ buffers/cache: 491 1385 > Swap: 2015 0 2015 > > Would the solution be as simple as a repository I would need to > included/exclude for the dependencies that failed with qmailtoaster-plus, > thereby removing the compat libs I currently have ? > > I’m dumbstruck … > > > > This email is free from viruses and malware because avast! Antivirus > protection is active. > > > <QMT-CentOS6> > --------------------------------------------------------------------- > To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com > For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com > > > > This email is free from viruses and malware because avast! Antivirus > protection is active. > >
