On Nov 29, 2016, at 10:45 AM, Jaime Lerner <jaimeler...@geekgoddess.com> wrote:
I was just mentioning it because David kept pointing to that as an error and
thinking it was the issue as to why qmail wasn't working. It's definitely not
an issue on my server. Perhaps that's how it is set up for Digital Ocean
servers running CentOS 7...not sure.
He can run 'systemctl status network' to see that his network service is
running fine. (Mine shows it's using /etc/rc.d/init.d/network, and his may say
the same)
From: Eric Broch <ebr...@whitehorsetc.com>
Reply-To: <qmailtoaster-list@qmailtoaster.com>
Date: Tuesday, November 29, 2016 at 10:59 AM
To: <qmailtoaster-list@qmailtoaster.com>
Subject: Re: [qmailtoaster] error after changing squirrelmail conf new-install
I'm not sure what to tell you to get network management started. It always seems to work on my boxes, vm's included. Maybe I'm taking something for granted. When I configure my network settings on clean install sometimes I leave network settings alone (dhcp), install qmailtoaster, then run qmt_host.sh. Other times I set the hostname and ipv4 ip, gateway, and dns (on fresh install) and run qmt_host.sh to change everything. I've never had a problem with network manager (something I need to investigate now).
So the way around this (for now) is to edit the ifcfg-'device' file manually, something I hate to do.
On 11/29/2016 8:48 AM, Jaime Lerner wrote:
Just as an FYI, if I run the command 'nmtui' on my server I get the same response
"NetworkManager is not running". Just in case you're thinking that's an
issue...it's obviously not.
From: Eric Broch <ebr...@whitehorsetc.com>
Reply-To: <qmailtoaster-list@qmailtoaster.com>
Date: Tuesday, November 29, 2016 at 10:45 AM
To: <qmailtoaster-list@qmailtoaster.com>
Subject: Re: [qmailtoaster] error after changing squirrelmail conf new-install
And,
What are these settings:
IPADDR2=10.13.0.5
PREFIX2=16
If you don't need them remove.
On 11/29/2016 8:34 AM, Eric Broch wrote:
Do below and remove ifcfg-enp0s3
On 11/29/2016 8:32 AM, Eric Broch wrote:
Here's what I would do
# cp -p /etc/sysconfig/network-scripts/ifcfg-eth0 /root/'somewhere'
# vi /etc/sysconfig/network-scripts/ifcfg-eth0
erase all settings, paste below into the file and save
# systemctl restart network
DEVICE='eth0'
TYPE=Ethernet
BOOTPROTO=none
ONBOOT='yes'
HWADDR=62:ed:ca:6d:25:73
IPADDR=162.243.70.109
NETMASK=255.255.255.0
GATEWAY=162.243.70.1
IPADDR2=10.13.0.5
PREFIX2=16
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
DNS1=8.8.8.8
DNS2=8.8.4.4
# vi /etc/resolv.conf
clear all ipv6 nameserver settings
add:
nameserver 8.8.8.8
nameserver 8.8.4.4
On 11/29/2016 7:48 AM, David Overman wrote:
Ok,
I tried the script with my ip for ip4 address and 8.8.8.8 and 8.8.4.4
and with my actual ip and hostname.
Still getting Error: NetworkManager is not running.
[root@mail ~]# sh qmt-host.sh
Call this script as follows (example below):
qmt-host.sh hostname ipv4.address ipv4.gateway
qmt-host.sh me.mydomain.com 192.168.0.2 192.168.0.1
Machine ID: f4d13c7c7b144261851b451e00bb999b
Boot ID: a73c2022069042cf8d8e58ca859c787e
Virtualization: kvm
Operating System: CentOS Linux 7 (Core)
CPE OS Name: cpe:/o:centos:centos:7
Kernel: Linux 3.10.0-327.36.3.el7.x86_64
Architecture: x86-64
Error: NetworkManager is not running.
On Nov 29, 2016, at 08:26 AM, Eric Broch <ebr...@whitehorsetc.com> wrote:
Try running this:
https://raw.githubusercontent.com/qmtoaster/scripts/master/qmt_host.sh
Or
Take a look here:
http://ask.xmodulo.com/configure-static-ip-address-centos7.html
You must get rid of the IPv6 name servers
On 11/29/2016 4:37 AM, David Overman wrote:
[root@mail ~]# systemctl start network
[root@mail ~]# nmtui
NetworkManager is not running.
Do you think this may have something to do with my Centos Instance running on A
digitalocean droplet?
On Nov 28, 2016, at 07:37 AM, Eric Broch <ebr...@whitehorsetc.com> wrote:
# systemctl start network
On 11/28/2016 12:16 AM, David Overman wrote:
Failed to start NetworkManager.service: Unit NetworkManager.service is
masked
---------------------------------------------------------------------
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
