Hi Everyone, I just updated to the new Qt Creator 3.6.0 to test out the new features.
I've been happily using the old Qt Creator with QBS to develop for ARM microcontrollers mixing C++ and C together. Unfortunately, my bare metal project stopped working and I can't seem to figure out why is that? It looks like it compiles some files and then gives a strange error about "arm-none-eabi-gcc.out" not being found or something along those lines. Also I'm using windows. Here is the full error: 22:22:26: Running steps for project blinky_template... compiling nrf_drv_common.c compiling nrf_delay.c compiling gcc_startup_nrf51.s compiling main.c The process 'C:\Program Files (x86)\GNU Tools ARM Embedded\4.9 2015q3\bin\arm-none-eabi-gcc.out' could not be started: Process failed to start: No such file or directory. The full command line invocation was: "C:\Program Files (x86)\GNU Tools ARM Embedded\4.9 2015q3\bin\arm-none-eabi-gcc.out" -g -O0 -pipe "-fvisibility=default" "-mcpu=cortex-m0" -mthumb "-mabi=aapcs" "-mfloat-abi=soft" "-std=gnu99" -fno-builtin -fdata-sections -ffunction-sections -fno-strict-aliasing -Wall -DDEBUG -DNRF51 -DBOARD_BLE400 -DBSP_DEFINES_ONLY "-DBUILD_NUM=0001" "-DBOARD_REV=1" -IC:/Users/Raivis/qt_projects/nrf_blinky_example -IC:/Users/Raivis/qt_projects/nrf_blinky_example/config -IC:/Users/Raivis/qt_projects/nrf_blinky_example/drivers -IC:/Users/Raivis/qt_projects/sdk_10/examples/bsp -IC:/Users/Raivis/qt_projects/sdk_10/external/freertos/config -IC:/Users/Raivis/qt_projects/sdk_10/external/freertos/portable/GCC/nrf51 -IC:/Users/Raivis/qt_projects/sdk_10/external/freertos/portable/CMSIS/nrf51 -IC:/Users/Raivis/qt_projects/sdk_10/external/freertos/source/include -IC:/Users/Raivis/qt_projects/sdk_10/components/device -IC:/Users/Raivis/qt_projects/sdk_10/components/drivers_nrf/config -IC:/Users/Raivis/qt_projects/sdk_10/components/drivers_nrf/hal -IC:/Users/Raivis/qt_projects/sdk_10/components/drivers_nrf/common -IC:/Users/Raivis/qt_projects/sdk_10/components/drivers_nrf/nrf_soc_nosd -IC:/Users/Raivis/qt_projects/sdk_10/components/drivers_nrf/clock -IC:/Users/Raivis/qt_projects/sdk_10/components/drivers_nrf/uart -IC:/Users/Raivis/qt_projects/sdk_10/components/drivers_nrf/timer -IC:/Users/Raivis/qt_projects/sdk_10/components/drivers_nrf/ppi -IC:/Users/Raivis/qt_projects/sdk_10/components/drivers_nrf/gpiote -IC:/Users/Raivis/qt_projects/sdk_10/components/drivers_nrf/rng -IC:/Users/Raivis/qt_projects/sdk_10/components/drivers_nrf/rtc -IC:/Users/Raivis/qt_projects/sdk_10/components/drivers_nrf/spi_master -IC:/Users/Raivis/qt_projects/sdk_10/components/drivers_nrf/spi_slave -IC:/Users/Raivis/qt_projects/sdk_10/components/drivers_nrf/twi_master -IC:/Users/Raivis/qt_projects/sdk_10/components/drivers_nrf/wdt -IC:/Users/Raivis/qt_projects/sdk_10/components/drivers_nrf/delay -IC:/Users/Raivis/qt_projects/sdk_10/components/libraries/util -IC:/Users/Raivis/qt_projects/sdk_10/components/libraries/uart -IC:/Users/Raivis/qt_projects/sdk_10/components/libraries/fifo -IC:/Users/Raivis/qt_projects/sdk_10/components/libraries/pwm -IC:/Users/Raivis/qt_projects/sdk_10/components/libraries/twi -IC:/Users/Raivis/qt_projects/sdk_10/components/toolchain -IC:/Users/Raivis/qt_projects/sdk_10/components/toolchain/gcc -c C:/Users/Raivis/qt_projects/sdk_10/components/drivers_nrf/common/nrf_drv_common.c -o C:/Users/Raivis/qt_projects/nrf_blinky_example/_build/debug/qtc_nrf51822_1a2d8d44-debug/blinky.qtc-nrf51822-1a2d8d44.91c868bf/.obj/a1984a11635b8aa1/nrf_drv_common.c.o The following products could not be built for configuration qtc_nrf51822_1a2d8d44-debug: blinky Error while building/deploying project blinky_template (kit: nrf51822) When executing step "Qbs Build" 22:22:26: Elapsed time: 00:00. I'm honestly at the moment out of ideas what to do :) Any help would be appreciated thanks. Best Regards. Raivis Strogonovs
_______________________________________________ Qt-creator mailing list Qt-creator@qt-project.org http://lists.qt-project.org/mailman/listinfo/qt-creator
