Hi all! I've been using qtile for some time with a somewhat obscure setup with a custom layout. I don't doubt that the below issues are due to my setup.
I'm hoping qtile can advise on the best way of approaching the issues, which I assume would be to passively log / listen for X11 calls to a point where I can reproduce the problems directly to better resolve the issues. I have minimal X11/C experience. Recently I'm running into oddities where Firefox browser tabs appear to end up in a broken state after click/dragging such that the browser 'freezes' until the window loses focus and regains it. On focus regain, some amount of events seem to execute, but the browser remains in a 'freeze' state. Mashing Ctrl + W to close tabs eventually fixes the issue. I'm yet to reliably reproduce the issue, which began occurring around August of last year, I rebased my layout to the latest qtile and the issue persists. I have a similar problem with another GUI application where even though the window loses focus according to qtile / border colour, the focus remains on the window. I suspect this is caused by the app requesting focus which is incorrectly released. I would anticipate that the app is the problem here, as it's built poorly. Is there a way of listening for relevant X11 events so that I can identify the cause of both of these behaviors? I'm not sure if it's even possible, but if it is I would anticipate a significant amount of noise within BAU traffic. If anyone could advise on a better approach that would be nice :) Thanks! -- You received this message because you are subscribed to the Google Groups "qtile-dev" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/qtile-dev/6d9f422b-385b-46cd-af1d-8b18aa32d57fn%40googlegroups.com.
