Nicki, long before the OEM improved their version of the automatic/electric 
 door opening systems, the mobility/conversion industry was using Delco 
window  motors/actuators. Then they started importing a similar component that 
looked  the same but was cheaper to produce. I'm hoping your friend at the 
machine shop  is able to either remove the old pulley or obtain a new one.
Best Wishes
 
 
In a message dated 9/6/2015 4:05:50 P.M. Central Daylight Time,  
[email protected] writes:

 
Wheelchair  you are always so helpful and we have a WW Grainger about 65 
miles away and my  brother works nearby. Sadly the pulley doesn’t have any 
markings at all but  the man who owns a machine shop (actually designed a gun 
for the military)  called and is happy to look at it when he gets home.  
It  can always be worse so I’ll be patient. My brother found the cable and 
the  company gave it to him along w/ everything else he  needed. 
Hopefully  by Wednesday I’ll be fixed up J 
Nicki 
 
 
From:  [email protected] [mailto:[email protected]] 
Sent: Sunday,  September 06, 2015 2:27 PM
To: [email protected];  [email protected]; [email protected];  
[email protected]
Subject: [QUAD-L] Re: ? about door motor main  pulley

 
Happy  Holiday Nicki.  I'm sure IMS did not purchase pulleys at ACE 
Hardware,  but rather using one of two potential suppliers.  McMaster Carr or 
WW  
Granger.  Look for unique markings on your pulley before contacting these  
industrial  suppliers.
 

 
Glad  you were able to find the cable.  Did you also find the "yoke"   
"stop" and "connectors"
 
Best  Wishes
 

 
 
In a  message dated 9/6/2015 2:02:00 P.M. Central Daylight Time, 
[email protected]_ (mailto:[email protected])   writes:

 
I sent to a few of you directly  because you’ve helped in the past and yes 
Wheelchair I found the cable to  make my own finally). 
I have a 2002 Dodge Grand Caravan  IMS Rampvan Conversion. 
I’m having problems w/ the cable  staying on and my brother came out to 
replace the cable, this would be the  4th in less than a year (previous 3 were 
done by the  dealer). 
The door worked great twice but  then the cable (which wraps a certain way 
around the pulley on the motor  shaft) criss-crossed so the door only opened 
part way. 
After further inspection of the  pulley and old cables (which the coating 
was getting stripped off of) my  brother noticed the pulley has gotten 
grooved from the bare cable.  We  think  
this is why the cables are  wearing out.  
I had on old motor and we were  going to swap the pulleys (the other one isn
’t worn) and he couldn’t get it  off the old motor. It came right off the 
motor that is on my  van. 
I know my dealer, now United  Access, won’t sell me a pulley but they’ll 
sell me a new motor for  $1250.00 
Any idea where I can buy it?  Would it be an OEM part? 
Trying to contact a machine shop  to fabricate one but the owner isn’t 
answering today………yes, Sunday of Labor  Day weekend. J 
Nicki  




Reply via email to