This post is a bit off topic, but I hope someone can help. I have a "House Branded" Wireless Access Point purchased at CompUSA approximately 2 years ago (when they were blowing out the "802.11B only" products to make room for the "802.11G's") At first, since I was the only kid on the block with wireless, I set it up naked and ran without wired equivalent protection settings. Recently I have noticed another signal in the neighborhood and it is now time that I locked my unit down!
The problem is that in the two years since installing it and letting it sit, the unit no longer responds to the password I gave it. My guess is that it has regressed to the default settings possibly from one of our past power outages. I have pushed the reset button on the unit, (just to be sure we were starting from scratch,) and now need to have the "Default" password to get in. Naturally I cannot find the instruction manual and I am hoping that somebody in the group will have a similar unit and will be able to provide me with the missing password. Any ideas on how to start over would be appreciated. This is what I know about the unit: MAC address: 0008A1425AD7 DA CompUSA SKU: 295105 My guess is that it was originally made by CNet Technologies (but they no longer admit to any products before "G's".) -- Quadlist is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> Quadlist info: <http://lowendmac.com/lists/quadlist.shtml> --> AOL users, remove "mailto:" Send list messages to: <mailto:quadlist@mail.maclaunch.com> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/quadlist%40mail.maclaunch.com/> iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com