Igor - What's the output of this command: grep MULTIPATH_NUM config.h
donald On Wed, Apr 6, 2016 at 1:26 PM, Igor Ryzhov <[email protected]> wrote: > Hello. > > Multipath doesn't work for me in release 1.0. > > I have two interfaces eth1 and eth2 with IPs 192.168.0.101/24 and > 192.168.1.101/24. > And I am adding two routes: > ip route 1.2.3.0/24 192.168.0.1 > ip route 1.2.3.0/24 192.168.1.1 > > With 0.99.24.1 I have no problems and I see both of them in FIB: > > S>* 1.2.3.0/24 [1/0] via 192.168.0.1, eth1 > * via 192.168.1.1, eth2 > C>* 127.0.0.0/8 is directly connected, lo > C>* 192.168.0.0/24 is directly connected, eth1 > C>* 192.168.1.0/24 is directly connected, eth2 > > But in 1.0 only the first one is in FIB: > > S>* 1.2.3.0/24 [1/0] via 192.168.0.1, eth1 > via 192.168.1.1, eth2 > C>* 127.0.0.0/8 is directly connected, lo > C>* 192.168.0.0/24 is directly connected, eth1 > C>* 192.168.1.0/24 is directly connected, eth2 > > Both versions are built with --enable-multipath=0. > > Maybe I have to do something more in 1.0 to enable multipath? > > Best regards, > Igor > _______________________________________________ > Quagga-dev mailing list > [email protected] > https://lists.quagga.net/mailman/listinfo/quagga-dev >
_______________________________________________ Quagga-dev mailing list [email protected] https://lists.quagga.net/mailman/listinfo/quagga-dev
