Hi to all of you,
I am using quagga 1.2.1 on a freebsd (10.0) as provided from an already
compiled packaged. We are using quagga in the university lab to teach
routing protocols.
In a simple set up of two connected routers where I setup a direct
external bgp peering, the routes are exchanged but are not established
in the routing table as their bgp_nhop is reported as inaccesible
although it is received from a connected interface.
See the attached image. The configuration of two routers follows..
!
router-a@pc-dkalo:~
! Zebra configuration saved from vty
! 2017/05/16 16:50:22
!
!
interface em0
ipv6 address fc80:1::1/64
!
interface em1
ipv6 address fc80:3::1/126
!
interface em2
!
interface em3
!
interface lo0
!
ip forwarding
ipv6 forwarding
!
!
line vty
!
!
! Zebra configuration saved from vty
! 2017/05/16 16:50:22
!
!
router bgp 65010
bgp router-id 1.1.1.1
neighbor fc80:3::2 remote-as 65020
! neighbor fc80:3::2 soft-reconfiguration inbound
!
address-family ipv6
network fc80:1::/64
neighbor fc80:3::2 activate
! neighbor fc80:3::2 soft-reconfiguration inbound
exit-address-family
exit
!
line vty
!
router-b@pc-dkalo:~#
!
! Zebra configuration saved from vty
! 2017/05/16 17:49:55
!
!
interface em0
ipv6 address fc80:2::1/64
!
interface em1
ipv6 address fc80:3::2/126
!
interface em2
!
interface em3
!
interface lo0
!
ipv6 forwarding
!
!
line vty
!
!
! Zebra configuration saved from vty
! 2017/05/16 17:49:55
!
!
router bgp 65020
bgp router-id 2.2.2.2
neighbor fc80:3::1 remote-as 65010
!
address-family ipv6
network fc80:2::/64
neighbor fc80:3::1 activate
exit-address-family
exit
!
line vty
!
--
Cheers,
Dimitris
--
Dimitrios K. Kalogeras
Electrical Engineer Ph.D.
Network Engineer
NTUA/ICCS
_____________________________________
skype: aweboy
voice: +30-210-772 1863
fax: +30-210-772 1866
_______________________________________________
Quagga-dev mailing list
[email protected]
https://lists.quagga.net/mailman/listinfo/quagga-dev
