Thank you very much. Applied.
regards,
Paul
On Thu, 14 Dec 2017, Mathieu Jadin wrote:
Hello,
Since quagga-1.2.0, the Next Hop validation for directly connected peers
using IPv6 does not work.
In this setup, BGP updates contain two next hops: a global IPv6 address and a
link-local IPv6 address (a correct behavior according to RFC 2545).
This means that the length of the next hop attribute is 32 and not 16.
The problem comes from the function "make_prefix()" in "bgpd/bgp_nht.c".
It refuses to build a prefix structure for a route when the length of the
next hop attribute is different from 16, even if a valid global IPv6 address
is available.
The route is mistakenly considered invalid and thus, it is not installed in
the routing table.
Therefore, I propose the attached patch to fix this issue.
This should solve Bug-946 <https://bugzilla.quagga.net/show_bug.cgi?id=946>
and the message [quagga-users 14883]
<https://lists.quagga.net/pipermail/quagga-users/2017-December/014917.html>.
Regards,
Mathieu
Details: "make_prefix()" was not modified in quagga-1.2.0 but its
interpretation was changed in commit 3dda6b3eccb9a2a88d607372c83c04c796e7daac
<https://git.savannah.gnu.org/gitweb/?p=quagga.git;a=commit;h=3dda6b3eccb9a2a88d607372c83c04c796e7daac>.
Before this commit, the failure of "make_prefix()" was interpreted as a
successful validation of the next hop.
--
Paul Jakma | [email protected] | @pjakma | Key ID: 0xD86BF79464A2FF6A
Fortune:
QOTD:
"If he learns from his mistakes, pretty soon he'll know everything."
_______________________________________________
Quagga-dev mailing list
[email protected]
https://lists.quagga.net/mailman/listinfo/quagga-dev
