Hi Guys,

I've been trying to get both ipv4 and ipv6 routes in place with BGP,  found
no luck so far, Surfing the internet lead me to the same issue reported
earlier in ilist
<https://lists.quagga.net/pipermail/quagga-dev/2011-September/008869.html>.
  I've trying this on latest version 1.0.20160315 and find no success.   I
 also tried 0.99.20 with patch attached to the earlier ilist and that works
like charm.

Can someone help how can i achieve this with latest version of quagga?

Below is the test output for both 1.0.20160315 and patched version of
0.99.20

#========== quaggga  1.0.20160315 ===========

07:57:13 a@oxy-oxygen-0a52c5e3:~$  bgpd -v
bgpd version 1.0.20160315
Copyright 1996-2005 Kunihiro Ishiguro, et al.
configured with:
--enable-vtysh --disable-ripd --disable-ripngd --disable-isisd
--disable-pimd --disable-ospfd --disable-ospf6d --disable-ospfapi
--disable-ospfclient --disable-isisd --disable-rtadv
--enable-logfile-mask=0644 --prefix=/home/y --libdir=/home/y/lib64
--enable-user=quagga --enable-group=users --enable-vty-group=users
--disable-doc
07:57:21 a@oxy-oxygen-0a52c5e3:~$


oxy-oxygen-0a52c5e3# show ip route connected
Codes: K - kernel route, C - connected, S - static, R - RIP,
       O - OSPF, I - IS-IS, B - BGP, P - PIM, A - Babel,
       > - selected route, * - FIB route

C>* 10.1.1.10/32 is directly connected, lo
C>* 10.82.196.0/22 is directly connected, eth0
C>* 127.0.0.0/8 is directly connected, lo
oxy-oxygen-0a52c5e3#
oxy-oxygen-0a52c5e3#
oxy-oxygen-0a52c5e3# show ipv6 route  connected
Codes: K - kernel route, C - connected, S - static, R - RIPng,
       O - OSPFv6, I - IS-IS, B - BGP, A - Babel,
       > - selected route, * - FIB route

C>* ::1/128 is directly connected, lo
C>* 2002::/16 is directly connected, lo
C>* fe80::/64 is directly connected, eth0
oxy-oxygen-0a52c5e3#


oxy-oxygen-0a52c5e3#
oxy-oxygen-0a52c5e3# configure  terminal
oxy-oxygen-0a52c5e3(config)# router bgp  1
oxy-oxygen-0a52c5e3(config-router)# redistribute connected
oxy-oxygen-0a52c5e3(config-router)#  address-family ipv6
oxy-oxygen-0a52c5e3(config-router-af)#  redistribute connected
oxy-oxygen-0a52c5e3(config-router-af)# end
oxy-oxygen-0a52c5e3#

oxy-oxygen-0a52c5e3# show ip bgp
BGP table version is 0, local router ID is 10.1.1.10
Status codes: s suppressed, d damped, h history, * valid, > best, =
multipath,
              i internal, r RIB-failure, S Stale, R Removed
Origin codes: i - IGP, e - EGP, ? - incomplete

   Network          Next Hop            Metric LocPrf Weight Path
*> 10.1.1.10/32     0.0.0.0                  0          32768 ?
*> 10.82.196.0/22   0.0.0.0                  0          32768 ?

Displayed  2 out of 2 total prefixes
oxy-oxygen-0a52c5e3#
oxy-oxygen-0a52c5e3# show ipv6 bgp
No BGP prefixes displayed, 0 exist
oxy-oxygen-0a52c5e3#

#========== quaggga  1.0.20160315  end ===========




#========== quaggga  0.99.20  ===========
# this version is downloaded from
http://download.savannah.gnu.org/releases/quagga/quagga-0.99.20.tar.gz
# and the patches applied from
https://lists.quagga.net/pipermail/quagga-dev/2011-September/008892.html
#  redistribute connected works after applying the patch for 0.99.20

07:57:16 a@oxy-oxygen-0a52c5e4:~$  bgpd -v
bgpd version 0.99.20
Copyright 1996-2005 Kunihiro Ishiguro, et al.
07:57:18 a@oxy-oxygen-0a52c5e4:~$


oxy-oxygen-0a52c5e4# show ip route connected
Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF,
       I - ISIS, B - BGP, > - selected route, * - FIB route

C>* 10.1.1.10/32 is directly connected, lo
C>* 10.82.196.0/22 is directly connected, eth0
C>* 127.0.0.0/8 is directly connected, lo
oxy-oxygen-0a52c5e4#
oxy-oxygen-0a52c5e4# show ipv6 route  connected
Codes: K - kernel route, C - connected, S - static, R - RIPng, O - OSPFv3,
       I - ISIS, B - BGP, * - FIB route.

C>* ::1/128 is directly connected, lo
C>* 2002::/16 is directly connected, lo
C>* fe80::/64 is directly connected, eth0
oxy-oxygen-0a52c5e4#
oxy-oxygen-0a52c5e4#
oxy-oxygen-0a52c5e4# configure  terminal
oxy-oxygen-0a52c5e4(config)#  router bgp  1
oxy-oxygen-0a52c5e4(config-router)# redistribute connected
oxy-oxygen-0a52c5e4(config-router)#  address-family ipv6
oxy-oxygen-0a52c5e4(config-router-af)#  redistribute connected
oxy-oxygen-0a52c5e4(config-router-af)# end
oxy-oxygen-0a52c5e4#

oxy-oxygen-0a52c5e4# show ip bgp
BGP table version is 0, local router ID is 10.1.1.10
Status codes: s suppressed, d damped, h history, * valid, > best, i -
internal,
              r RIB-failure, S Stale, R Removed
Origin codes: i - IGP, e - EGP, ? - incomplete

   Network          Next Hop            Metric LocPrf Weight Path
*> 10.1.1.10/32     0.0.0.0                  1         32768 ?
*> 10.82.196.0/22   0.0.0.0                  1         32768 ?

Total number of prefixes 2
oxy-oxygen-0a52c5e4#
oxy-oxygen-0a52c5e4# show ipv6 bgp
BGP table version is 0, local router ID is 10.1.1.10
Status codes: s suppressed, d damped, h history, * valid, > best, i -
internal,
              r RIB-failure, S Stale, R Removed
Origin codes: i - IGP, e - EGP, ? - incomplete

   Network          Next Hop            Metric LocPrf Weight Path
*> 2002::/16        ::                       1         32768 ?

Total number of prefixes 1
oxy-oxygen-0a52c5e4#

#========== quaggga  0.99.20 end ===========

Thanks,
Anil
_______________________________________________
Quagga-users mailing list
[email protected]
https://lists.quagga.net/mailman/listinfo/quagga-users

Reply via email to