W dniu 18.08.2016 o 17:50, Rahul Bazaz pisze: > Hey Tom, > > Thanks for your reply. Could you please clarify what you mean by > "entered at the root level of the command tree", do you mean that I > need to sudo vtysh to enter quagga or apply the route-map command > before the "configure terminal" step, because I have tried both those > and they dont seem to work. works for me: root@rw2:~# vtysh
Hello, this is Quagga (version 0.99.24.1). Copyright 1996-2005 Kunihiro Ishiguro, et al. rw2# conf ter rw2(config)# route-map Peer-R3 permit 10 rw2(config-route-map)# Show us what are you doing :-) Which version do you use? Are you compiled it by self? Or is from any distribution? > > Thanks again for your help! > Rahul > > On Wed, Aug 17, 2016 at 9:05 PM, Tom Samplonius <[email protected] > <mailto:[email protected]>> wrote: > >> rahul-VirtualBox(config)# route-map Peer-R3 permit 10 >> % [BABEL] Unknown command: route-map Peer-R3 permit 10 > > I think you are entering this command in a “router babel” > context, but route-map must be entered at the root level of the > command tree. > > > Tom > > > > > _______________________________________________ > Quagga-users mailing list > [email protected] > https://lists.quagga.net/mailman/listinfo/quagga-users -- Regards, Andrzej 'The Undefined' Dopierała http://andrzej.dopierala.name/
_______________________________________________ Quagga-users mailing list [email protected] https://lists.quagga.net/mailman/listinfo/quagga-users
