Hi, We are using quagga version 1.1.1as a route-server and have just noticed that send-community doesn't appear to work when configured under a peer-group -
Config snippet as follows - neighbor ROUTE-SERVER_POLICY_IPV4_IN peer-group neighbor ROUTE-SERVER_POLICY_IPV4_IN ttl-security hops 1 neighbor ROUTE-SERVER_POLICY_IPV4_IN timers 5 15 neighbor ROUTE-SERVER_POLICY_IPV4_IN activate neighbor ROUTE-SERVER_POLICY_IPV4_IN *send-community both* neighbor ROUTE-SERVER_POLICY_IPV4_IN soft-reconfiguration inbound neighbor ROUTE-SERVER_POLICY_IPV4_IN maximum-prefix 1 100 neighbor ROUTE-SERVER_POLICY_IPV4_IN route-server-client neighbor ROUTE-SERVER_POLICY_IPV4_IN route-map IPV4_IN in neighbor ROUTE-SERVER_POLICY_IPV4_IN route-map IPV4_OUT out route-map IPV4_OUT deny 10 match ip address prefix-list IPV4_DENIED_PREFIXES ! route-map IPV4_OUT deny 20 match as-path 99 ! route-map IPV4_OUT permit 100 *set community 12345:2 additive* set origin igp As you cn see we are explicitly setting a community in the outbound route-map but neighbors are not receiving the community. Has anyone seen this before or knows that this is working (or not) or perhaps can point me to a thread where this has been discussed before? Can't seem to find a searchable archive of this list :( Thanks daz
_______________________________________________ Quagga-users mailing list Quagga-users@lists.quagga.net https://lists.quagga.net/mailman/listinfo/quagga-users
