Hi all
I have such a question.
quagga-0.99.23.1, 4 bgp-peers, no IGP, only static, 4 core processor,
all NIC's interrupts are evenly distributed between processor cores -
all loads are defined and distributed between processor cores :)
State/PfxRcd
137326
682774
85433
686579
But once every minute for about 3-10 seconds there is a "BGP general
scanning", which is arbitrarily executed on any of the processor cores
and loads it 100% within a specified time.
2018/02/14 18:40:41 BGP: Performing BGP general scanning
2018/02/14 18:40:42 BGP: scanning IPv4 Unicast routing tables
Question:
1) Can I turn off (disable) "BGP general scanning" (command 'bgp
scan-time <5-60>') ? Is this a good idea in my case ?
2) Can I perform "BGP general scanning" on a specific processor core,
not chaotic ?
_______________________________________________
Quagga-users mailing list
Quagga-users@lists.quagga.net
https://lists.quagga.net/mailman/listinfo/quagga-users