Hi This should suffice. Will investigate this and resolve this
Thanks Balaji On Fri, 16 Feb 2018 at 22:04, Ivan Kuznetsov <k...@solvo.ru> wrote: > Hello > > I try to setup a test software router under Linux (Oracle Linux 6 > x86_64) and Quagga 1.2.3. ospfd being started exited a few seconds after > with assertion fault. It seems that is a time of first multicast network > packet received. OSPF configuration is quite simple : > > interface eth0 > ! > interface eth0.3 > ip ospf authentication-key ******** > ! > interface eth1 > ! > interface eth2 > ! > interface eth3 > ! > interface lo > ! > router ospf > ospf router-id 172.16.83.71 > auto-cost reference-bandwidth 1000 > passive-interface eth0 > passive-interface eth1 > passive-interface eth2 > passive-interface eth3 > network 172.16.83.71/26 area 172.16.80.0 > area 172.16.80.0 authentication > ! > line vty > > Quagga 1.2.2 at the same computer and configuration works as desired. > > I built 1.2.3 RPM using quagga.spec file from tarball with only cosmetic > changes. It is near identical against one from 1.2.2. Building > environment is the same > > Here is crashlog: > > 2018/02/16 18:32:26 OSPF: Assertion `thread->master != ((void *)0) && > thread != ((void *)0)' failed in file thread.c, line 607, function > thread_add_unuse > 2018/02/16 18:32:26 OSPF: Backtrace for 12 stack frames: > 2018/02/16 18:32:26 OSPF: [bt 0] > /usr/lib64/quagga/libzebra.so.1(zlog_backtrace+0x35) [0x7fbfd7cb2ea5] > 2018/02/16 18:32:26 OSPF: [bt 1] > /usr/lib64/quagga/libzebra.so.1(_zlog_assert_failed+0x67) [0x7fbfd7cb3027] > 2018/02/16 18:32:26 OSPF: [bt 2] > /usr/lib64/quagga/libzebra.so.1(+0x27cfe) [0x7fbfd7ca1cfe] > 2018/02/16 18:32:26 OSPF: [bt 3] > /usr/lib64/quagga/libzebra.so.1(+0x28389) [0x7fbfd7ca2389] > 2018/02/16 18:32:26 OSPF: [bt 4] > /usr/lib64/quagga/libzebra.so.1(funcname_thread_execute+0x4c) > [0x7fbfd7ca30cc] > 2018/02/16 18:32:26 OSPF: [bt 5] > /usr/lib64/quagga/libospf.so.0(+0x2f71d) [0x7fbfd7f1d71d] > 2018/02/16 18:32:26 OSPF: [bt 6] > /usr/lib64/quagga/libospf.so.0(ospf_read+0x149e) [0x7fbfd7f200be] > 2018/02/16 18:32:26 OSPF: [bt 7] > /usr/lib64/quagga/libzebra.so.1(+0x282b2) [0x7fbfd7ca22b2] > 2018/02/16 18:32:26 OSPF: [bt 8] > /usr/lib64/quagga/libzebra.so.1(thread_main+0x18) [0x7fbfd7ca3838] > 2018/02/16 18:32:26 OSPF: [bt 9] ospfd(main+0x337) [0x401b07] > 2018/02/16 18:32:26 OSPF: [bt 10] > /lib64/libc.so.6(__libc_start_main+0xfd) [0x3d4f01ed1d] > 2018/02/16 18:32:26 OSPF: [bt 11] ospfd() [0x401669] > 2018/02/16 18:32:26 OSPF: Current thread not known/applicable > > What can be a troubleshooting procedure? > > > Regards, Ivan Kuznetsov > SOLVO ltd > > _______________________________________________ > Quagga-users mailing list > Quagga-users@lists.quagga.net > https://lists.quagga.net/mailman/listinfo/quagga-users >
_______________________________________________ Quagga-users mailing list Quagga-users@lists.quagga.net https://lists.quagga.net/mailman/listinfo/quagga-users