Have a look @ http://stores.shop.ebay.co.uk/REGALS-Motorsport_Aluminium-Pipes_W0QQ_fsubZ2549640QQ_sidZ124943813QQ_trksidZp4634Q2ec0Q2em14?_pgn=2 They have many sizes of joiners & T pieces, may just have what you are looking for.
John On 27 Aug, 08:42, Jim Hearne <[email protected]> wrote: > Yes, cut it and join it with a aluminium pipe coupler. > Most of the kit car parts companies sell them, demon, merlin motorsport etc. > I think Merlin will cut pipe to length and then roll a bead on each > length to give you a longer length. > A local metal fabrication place should be able to weld a side pipe into > it for not a lot if you have it all ready for them. > > A quick way of joining heater sized hoses is to use 13mm copper water > pipe with a olive soldered to each end to form a bead. > > Jim > > > > Arn1905 wrote: > > Thanks, i was looking over your site last night. > > > I think im going to have to keep the original hose but lengthen in. > > Would i be ok to cut it and add some kind of metal pipe? Like some > > people do with the water temp gauges. > > Then i can just weld a smaller pipe off of it for the turbo. > > > On Aug 26, 8:47 pm, Jim Hearne <[email protected]> wrote: > > >> There are some pictures on my site.www.quantums.info > >> You will be lucky to find a hose that fits, you may be able to find one > >> you can shorten at one or both ends but often you will need to join at > >> least 2 sections of different hoses. > >> That why i've several boxes of s/h hoses in my garage. > > >> Jim > > >> Arn1905 wrote: > > >>> Thanks, if you could post a picture on here that would be very useful. > > >>> The problem im having is the nearside hose will not reach, am i able > >>> to just buy a piece of radiator hose and connect it up? Then ive just > >>> got to connect the hose for the turbo. > > >>> Ive been looking at some hose extenders aswell, just some alloy tube > >>> that you place the two parts of the hose over. > > >>> On Aug 24, 10:11 pm, Arn1905 <[email protected]> wrote: > > >>>> Ive been trying to find a post about a radiator that was used in a 2+2 > >>>> that fits, i think it was a mk3/5 escort rad or mondeo? > > >>>> I cant find the post so i am unsure, does anyone have any information > >>>> on this? > >>>> I would like to know how they fitted it and if they used some kind of > >>>> pipe extension or custom radiator pipe for the Nearside part. > > >>>> Im using it in the FRST build. > > >>>> Arnie- Hide quoted text - > > - Show quoted text - --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
