About about the mk2 fiesta diesel van? On Thu, 24 Sep 2009 08:56:38 +0100, Jim Hearne <[email protected]> wrote: > Curious. > Microcat normally shows if there was a earlier part number which can be > replaced with the later one but in case of the Mk2 Fiesta it lists only > one heater matrix for all models from 1983 to 1988. > > > Jim > > > Tony Pottrell wrote: >> I'm not sure what car my matrix is from, I assumed it was XR2 but maybe >> not. >> >> The one in the 2+2 has the outlets pointed slightly upwards, it caught me >> out when I tried to replace it I found the one with straight outlets >> fouled >> the brake transfer bar (or the crossmember of the subframe, I can't >> remember which) >> >> Tony >> >> On Thu, 24 Sep 2009 08:46:02 +0100, Jim Hearne <[email protected]> wrote: >> >>> Actually, you may be right, i wonder if they changed it when they >>> changed from type A to type B (as called by Quantum) brake servo and >>> transfer bar >>> The outlets come through the bulkhead very close to it. >>> >>> I should have checked on Microcat. >>> >>> ................... >>> >>> Ok, Microcat agrees with me, only one part fitted from 1983 to 1988 (all >>> >>> Mk2 Fiestas). >>> Could the other matrix's you had have been Mk3 Fiesta ? >>> >>> Finis code 6114258 >>> >>> Jim >>> >>> >>> Tony Pottrell wrote: >>> >>>> I think there are two types, I certainly have different matrices in my
>>>> spares pile (or I did... before I moved!). >>>> >>>> Dimensions are the same, but on one the inlet/outlet point straight out >>>> >>>> to the side, and on the other (and on the one in the 2+2 atm) they >>>> point >>>> >> >> >>>> upwards at about a 20 degree angle. >>>> >>>> T >>>> >>>> Jim Hearne wrote: >>>> >>>> >>>>> All Mk2 Fiesta matrix's will be the same. >>>>> All you might find are original plastic and aluminium one or >>>>> >> aftermarket >> >>>>> all copper ones which don't work as well in my experience. >>>>> >>>>> Get some foam tap about 1/2" x 1/4" before you do it to put round the >>>>> edges of the matrix and the old stuff will be squashed and fall off. >>>>> >>>>> Jim >>>>> >>>>> >>>>> Mark wrote: >>>>> >>>>> >>>>> >>>>>> My heater matrix went pop, big time, about 6 weeks ago. I haven't >>>>>> sorted it yet as I don't really need it at the mo. But its now coming >>>>>> up to winter, so it could be useful. >>>>>> >>>>>> Does anyone have a spare avaiable or know if there is a difference >>>>>> between the XR2 one and the other models? (I've seen one on ebay, but >>>>>> it doesn't state which model its for) >>>>>> >>>>>> Thanks >>>>>> Mark >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > >> >> > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
