I ran mine without a filter then when I changed the engine I fitted an aftermarket filter and then cut a hole in the bonnet Graham ------Original Message------ From: Sean To: Quantum Owners Group ReplyTo: quantumowners@googlegroups.com Subject: [Quantum Owners] Re: Extreme build Carb / bonnet problem Sent: 23 Nov 2009 8:58 AM
I have twin 45's on my pinto and I don't need a hole for those. The exhaust however, does. On Nov 22, 5:45 pm, Andrew <thefletcher...@btinternet.com> wrote: > Hello, > > I am slowly building an extreme with a 1.6 Pinto (temporary engine to > get me through the test) but there is not enough room in the bay to > fit the standard air filter or any obvious alternatives > > As I will be changing engine (probably for a zetec) I don't want to > cut out the bonnet and I can't see any obvious solution to fit a > filter in. > > I need to gain about 40mm.... > > I guess this is a similar problem for all pinto's and a few of you > have solved this problem before - any suggestions? > > Thanks. -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). Sent from my BlackBerry® wireless device -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
