The Mk3 ABS was very crude and not worth having IMHO. The brake fluid reservoir will have 2 plastic pipes entering near the top, which lead to the actuators which are bolted either side of the diff on the gearbox casing and are attached to the driveshafts as they come out from the diff by toothed belts.
If you ca is not carrying this additional and useless weight, you are lucky and don't have ABS. If the ends of the drive shaft that enter the diff are keyed for a toothed belt, then the car probably had ABS at some stage. You do not need to move the CV gaiters to see this. Regards, Steve On Monday 30 Nov 2009, Tony Pottrell wrote: > One way to test would be hitting the brakes very hard on a wet road, if > you lock up - no ABS :) > > Stuart Carvell wrote: > > Hello, > > How can i check if my H4 has ABS? > > I have always believed that it does but the Haynes manual says that it > > should have an abs valve attached to the rear axle but mine doesnt. > > The car is on axle stands at the moment. > > Only reason im asking is because some of the parts im replaceing are > > abs specific. > > Thanks > > Stuart -- www.h4-turbo.co.uk -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
