Unless it's the actual hub bearing thread. Some Fords have a reverse thread on the hub bearing nut on one side, i presume to discourage it from undoing due to the wheel rotation.
Jim Steve Kodz wrote: > Clockwise - like you're tightening a bolt, unless you're using a reverse > thread tap, which I doubt. > > Regards, > Steve > > On Tuesday 08 Dec 2009, Stuart Carvell wrote: > >> Probably a stupid question but, >> >> Which direction do you turn a tap? >> >> Need to rethread my rear axle >> >> Thanks >> >> Stuart >> >> _________________________________________________________________ >> Have more than one Hotmail account? Link them together to easily access >> both http://clk.atdmt.com/UKM/go/186394591/direct/01/ >> > > > > -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
