I've tried 99 Octane fuel, but made no difference.

Going back to basics can anyone confirm the part numbers to work with a 2.0l
DESK Mondeo ECU on a 2.0l Silver Top Zetec, Fiesta Alloy Inlet manifold and
Brown Injectors.

MAF
Throttle Body
Throttle Position Sensor
Any other 2.0 Mondeo specific sensors or parts?

Thanks

Chris

-----Original Message-----
From: quantumowners@googlegroups.com [mailto:quantumown...@googlegroups.com]
On Behalf Of Matthew Wastell
Sent: 30 June 2010 22:41
To: quantumowners@googlegroups.com
Subject: Re: [Quantum Owners] Zetec acceleration problem

Hi Chris,

How about filling up with some Tesco 99 octane?  This is what I originally
(stupidly) tuned mine to which caused pinking on any other fuel.   Might be
worth a go to at least see if it is likely fuel related. I'd say at least to
try a new tank of fuel, I've heard anecdotal of pinking on same octane
different brand fuel. 

I've some octane boost lying about I bought for the Ireland trip as there
was no super available over there, however it didn't seem to help for me.
if you happen to be passing you are welcome to it. Although I doubt it will
prove anything. 

Good luck

Matthew

On 30 Jun 2010, at 22:06, "Chris Fairlie" <chris.fair...@btconnect.com>
wrote:

> Thanks for the suggestions.
> 
> Definitely sounds like Pinking rather than a knock.
> 
> It happened all last week during the Haggis Hunt II with a mixture of
> different brands of petrol (Esso, Jet, BP, Murco etc. ) only one tank of
> Asda fuel.
> 
> I checked the plug gaps this evening and they were about 2.5mm. I reduced
> this to the 1.3mm stated in the Haynes manual. Then drove it from cold in
> cooled air. It still pinks.
> 
> Any more ideas?
> 
> Regards
> 
> 
> Chris
> 
> -----Original Message-----
> From: quantumowners@googlegroups.com
[mailto:quantumown...@googlegroups.com]
> On Behalf Of Jim Hearne
> Sent: 28 June 2010 09:12
> To: quantumowners@googlegroups.com
> Subject: Re: [Quantum Owners] Zetec acceleration problem
> 
> Are you using Tescos petrol ?
> I've noticed my 2.0 Mondeo pinking the last few weeks.
> It's now back to a standard engine spec so shouldn't be due to that.
> 
> Jim
> 
> 
> On 27/06/2010 21:56, Chris Fairlie wrote:
>> I have a 2 litre silver top with Ford DESK ecu in a 2+2.
>> 
>> It runs well ms of the time, but whenever I try to accelerate hard it
> makes
>> a rattling noise like pre ignition.
>> 
>> Any ideas what might be causing this?
>> 
>> Regards
>> 
>> Chris Fairlie
>> 
>> -----Original Message-----
>> From: quantumowners@googlegroups.com
> [mailto:quantumown...@googlegroups.com]
>> On Behalf Of barnacle
>> Sent: 24 June 2010 18:44
>> To: Quantum Owners Group
>> Subject: [Quantum Owners] Re: Fuel injection question for Jim Hearn
>> 
>> Thanks for that Jim. I've ordered the Hadrian injection Mk2 Fiesta
>> tank, which appears to have the outlet in the same place as yours (I
>> assume OEM from the lack of filter?).
>> A filter was definitely on the plan. Should be room for a small one...
>> good tip on the half-inch bend, thanks!
>> 
>> So, tank 12mm ->  bend 12mm ->  filter 12mm ->  pump ->8mm ->  fuel rail.
>> 
>> Ta!
>> 
>> On 24 June, 14:15, Jim Hearne<j...@quantums.info>  wrote:
>> 
>>> The Ford tank has a filter in the tank so you don't need a pre pump one.
>>> A pattern one probably doesn't so one would be a very good idea.
>>> But you need a low pressure filter not a high pressure one.
>>> 
>>> Jim
>>> 
>>> On 24/06/2010 13:04, barnacle wrote:
>>> 
>>> 
>>>> Jim, on this
>>>> 
>> 
>
photohttp://www.quantums.info/pictures/rst_in_2plus2/Fuel%20pump%20in%20fr..
>> .
>> 
>>>> you show the fuel pump... do you recall the part number, and perhaps
>>>> more critically, the output size of the tank? It *looks* like 8mm, but
>>>> I need to order filter and pump urgently and would hate to then find
>>>> it's 12mm.
>>>> 
>>> 
>>>> I won't be getting the tank till Saturday so I can't measure it!
>>>> 
>>> 
>>>> Thanks,
>>>> 
>>> 
>>>> Neil
>>>> 
>> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups
> "Quantum Owners Group" group.
> To post to this group, send email to quantumowners@googlegroups.com
> To unsubscribe from this group, send email to
> quantumowners-unsubscr...@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/quantumowners?hl=en
> 
> IMPORTANT NOTE: All information presented herewith is provided on an "As
Is"
> basis, without warranty or the implication thereof. Neither the Quantum
> Owners Club nor the individuals associated with the Quantum Owners Club or
> in the preparation of the above information shall have any liability to
any
> person or entity with respect to liability, loss, or damage caused or
> alleged to be caused directly or indirectly by the instructions contained
> within this or related message(s).
> 
> -- 
> You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
> To post to this group, send email to quantumowners@googlegroups.com
> To unsubscribe from this group, send email to
quantumowners-unsubscr...@googlegroups.com
> For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
> 
> IMPORTANT NOTE: All information presented herewith is provided on an "As
Is" basis, without warranty or the implication thereof. Neither the Quantum
Owners Club nor the individuals associated with the Quantum Owners Club or
in the preparation of the above information shall have any liability to any
person or entity with respect to liability, loss, or damage caused or
alleged to be caused directly or indirectly by the instructions contained
within this or related message(s).

-- 
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum
Owners Club nor the individuals associated with the Quantum Owners Club or
in the preparation of the above information shall have any liability to any
person or entity with respect to liability, loss, or damage caused or
alleged to be caused directly or indirectly by the instructions contained
within this or related message(s).

-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).

Reply via email to