Thanks for the replies all, think I will probably stick with 15" to be
on the safe side.

Cheers
Elliot

On Dec 30 2010, 7:16 am, Jur <[email protected]> wrote:
> The correct tyresizes (on a mk3 fiesta .. which the H4 uses as a
> donor) are
> 13" - 185/60R13 (standard XR2i 8v size)
> 14" - 185/55R14 (standard Fiesta RS turbo size)
> 15" - 195/45R15
> 16" - 195/40R16
>
> The last one i run on my FRST, without any rubbing, even on full
> lock.  (with a set of 16" ET40 6,5J Mondeo ST24 alloys)
>
> Try use a tyre calculator like the one 
> onhttp://www.205gti.com/techtyrecalc.htm
>
> Greets
> Jur
>
> On Dec 29, 10:05 pm, Steve Kodz <[email protected]> wrote:
>
>
>
> > Elliot,
> > Welcome to the world of Quantums.
>
> > While 16" wheels will fit I would probably recommend against them - 15"
> > would be a better size.  I have 16" wheels on my H4 with 205/45 tyres.  I
> > have had issues with rubbing, even with AVO coilover suspension fitted to
> > stiffen the suspension up.  The wheels did fit without the coilovers, but
> > the rubbing was a lot worse.  It may be possible to fit 195/45 tyres which
> > might help limit the rubbing.  There isn't really any easy way to modify the
> > front wheel arches - there is always a way, it just depends how deep your
> > pockets are.  The rear bumper can be cut away a bit if necessary, but agail
> > it's more likely the bodywork that is the main issue.
>
> > I can't recall what the offset is, but others on the group may be able to
> > help.
>
> > Regards,
> > Steve
> > --www.h4-turbo.co.ukwww.quantumowners.co.ukwww.quantumcars.co.ukwww.qua...
>
> > On Monday 27 Dec 2010, ElliotD wrote:> Hi All,
>
> > > Firstly hello, new to the group.
>
> > > I have just purchased a H4 which still has the original 3 spoke RS
> > > turbo alloys on it.
>
> > > I want to fit 16" alloys but I have been unable to find out what wheel
> > > offset and tyre size I should use. If anoyne knows and can tell me I
> > > would really appreciate it.
>
> > > Also, if I use 16" wheels & tyres, will I need to make any
> > > modifications to wheel arches etc ?
>
> > > Many thanks
> > > Elliot

-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).

Reply via email to