No, Jin, I need that offset to clear the gearbox end. I have an idea
that the bonnet may be offset two or three mm; I'll try centring that.
Looking yesterday, pre-alignment check, the driver's side is
definitely under but the passenger is about 6-8mm out - it's hard to
be exact.

Getting the alignment done today; MOT booked for Monday (it's
currently still in test).

Neil

On Mar 11, 7:01 am, jin <jinmys...@btinternet.com> wrote:
> could you not get 13mm turned off the back of the wheel centre?, i
> think my 2+2 wheels stick out just a touch anyway
>
> regards
>
> On Mar 10, 7:51 pm, barnacle <nailed.barna...@gmail.com> wrote:
>
> > Ta. I'll have a hunt.
>
> > On Mar 9, 10:54 pm, "jon jackson" <jon.jacks...@ntlworld.com> wrote:
>
> > > MX5 have some wheel spats available that I have seen recently but cannnot
> > > remember where.
>
> > > ----- Original Message -----
> > > From: "barnacle" <nailed.barna...@gmail.com>
> > > To: "Quantum Owners Group" <quantumowners@googlegroups.com>
> > > Sent: Wednesday, March 09, 2011 10:42 PM
> > > Subject: [Quantum Owners] On wheels with a larger offset than standard...
>
> > > Q2+2
>
> > > With the ET on my 15" wheels reduced to 25mm, although the tyre width
> > > is the same, the wheels are now 13mm further outboard than the
> > > original ET38 wheels... so they are fractionally outside the wings.
>
> > > Is there a *subtle* wing extension available for the 2+2 bonnet and
> > > tub to compensate? It's debatable at present whether it's actually
> > > outside the wing or not - it's that close - so I'm not looking for
> > > something three inches thick!
>
> > > Thanks,
>
> > > Neil
>
> > > (p.s. Got the electrics all sorted out now; just need to make a
> > > battery tray for the boot and refit the  dash...)
>
> > > --
> > > You received this message because you are subscribed to the Google Groups
> > > "Quantum Owners Group" group.
> > > To post to this group, send email to quantumowners@googlegroups.com
> > > To unsubscribe from this group, send email to
> > > quantumowners-unsubscr...@googlegroups.com
> > > For more options, visit this group 
> > > athttp://groups.google.com/group/quantumowners?hl=en
>
> > > IMPORTANT NOTE: All information presented herewith is provided on an "As 
> > > Is"
> > > basis, without warranty or the implication thereof. Neither the Quantum
> > > Owners Club nor the individuals associated with the Quantum Owners Club or
> > > in the preparation of the above information shall have any liability to 
> > > any
> > > person or entity with respect to liability, loss, or damage caused or
> > > alleged to be caused directly or indirectly by the instructions contained
> > > within this or related message(s).- Hide quoted text -
>
> > - Show quoted text -

-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).

Reply via email to