My catches are straight, When in place the hood sits just a couple of mil above the fibreglass. Have you checked the position of the locating blocks? Mark Miles
Manager Bar Square 8 Market Place Wokingham Berkshire RG40 1AL 07522 67 60 57 ________________________________ From: jin <jinmys...@btinternet.com> To: Quantum Owners Group <quantumowners@googlegroups.com> Sent: Sat, 9 July, 2011 9:35:32 Subject: [Quantum Owners] Re: 2+2 hood catches anybody? pleeease On Jul 6, 7:37 pm, jin <jinmys...@btinternet.com> wrote: > Hi all > > At the factory open day (great day as it was) I did happen to notice > that all other 2+2s had hood catches on the screen top that were > straight outwards > > Mine however are more bent upwards like so > > [IMG]http://i120.photobucket.com/albums/o192/jindal/DSC01715.jpg[/IMG] > > even before the open day i had identified straightening the catches > out as a way to stop the header rail on the hood from sticking up at > the back as this would effectively lower there height of the catch > that the latches latch onto and hence move them slightly lower down, > if that makes sense? > > So my big questions are > > Are every one else’s catches straight? > And is there any reason why mine are bent before i whip them off and > make new straight ones? > > Cheers loads -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).