Hi, I replaced my hood a couple of years ago and did not have those metal bits.
M -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of jin Sent: 31 August 2011 21:16 To: Quantum Owners Group Subject: [Quantum Owners] 2+2 hood fitting question hi guys can anyone confirm either way if the hood header rail should have little bits of metal screwed on either side inside the fabric? http://i120.photobucket.com/albums/o192/jindal/DSC01924.jpg that came off like so http://i120.photobucket.com/albums/o192/jindal/DSC01923.jpg the one was cut much deeper than the other to compensate for the drivers window glass sitting 3/4" lower, now they both sit 4mm from the GRP header rail, do i still need these? has anyone else got them? also i noticed when removing them that the inner flap / side of the hood was screwed to the header rail at the sides with 2x 3mm bolts through the holes you can see, is this normal? the build manual just states glue any help much appreciated folks thanks -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
