When I needed one I found that some later headlights had a similar adjuster
that could be used with a little modification. The other thing I did was to
replace all screws/nuts with stainless ones so that (hopefully) that
wouldn't rust and split the plastic like the originals.
----- Original Message -----
From: "taximark" <taxim...@yahoo.co.uk>
To: "Quantum Owners Group" <quantumowners@googlegroups.com>
Sent: Tuesday, March 13, 2012 1:56 PM
Subject: [Quantum Owners] Various parts
I have an MOT coming up in a couple of months and have a couple of
niggly jobs to do before it goes for the test.
Does anyone know where I can source the adjustable part for the
nearside headlamp mounting. I fabricated one for the last MOT but it
lasted only a few weeks.
I also need to source a pair of the locking 'thingies' that the split
pin fits into on the rear hubs. It is a castellated fitting that sits
over the hub nut. Alternatively a supplier for an appropriate
castellated hub nut.
Thank you
Mark
--
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum
Owners Club nor the individuals associated with the Quantum Owners Club or
in the preparation of the above information shall have any liability to any
person or entity with respect to liability, loss, or damage caused or
alleged to be caused directly or indirectly by the instructions contained
within this or related message(s).
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1424 / Virus Database: 2113/4867 - Release Date: 03/12/12
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
