Hi , I am preparing to replace a carbed CVH 1600 with an EFI CVH1600. I have a wiring loom from an EFI but I note that the wiring diagram indicates there is a Speed sensor. The Haynes manual is not clear but I perceive that there should be a speed sensor on the gearbox. The gearbox I have is from the carb version and obviously has no sensor. Is it possible to add a speed sensor or is it actually required? Also any idea exactly what numbers I should check for on the ECU to ensure compatability? The main numbers on the ECU are ECU-1V, 91AB-12A650-FA, EFI-SD111 and 1AFA. Any pointers appreciated.
regards Ken -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).