On the QOC website used to be three drawings how to adapt the frame, in the FAQ section, which I used. However, they seem to be temporarily not available.
Rather than cutting and welding the lower subframe tube, I used an cvh crankpulley and have enough clearance. Therefore it' s reconverted to single v-belt with a Peugeot crankpulley on the waterpump. Good luck, it's worth every effort, so much (even more) fun! Rolf -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
