Hi guys, need a bit of help on exhaust pipe sizing for the Zetec turbo 
project on my Xtreme.  Have almost finished making the exhaust manifold and 
thinking about exhaust pipe sizing.  Ideally to start with I wanted to use 
the existing pipe, CAT and silencer which are 57mm diameter pipes.  
Researching this via Google, found a post by a Garrett guy who states 2.5 
ins (63mm) is good for up to 250 BHP.  My plan is to go to just over 200BHP 
then in a few years up to about 250BHP.  Realise this gives me an answer of 
2.5 inches, but ideally to start with I was wanting to keep the existing 
silencer and CAT and change later, therefore was going to reduce top the 57 
mm (2.25 ins) at the CAT. I may just go 2.5 all the way, but first was 
curious about what diameter you guys with turbos are using with what power.

For anyone interested, I am still planning to come out of winter 
hibernation with the turbo working - target Stoneleigh!!

Thanks  Nigel

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

Reply via email to