Taking it apart is the easy bit, well, it took about 4 days and still not
quite finished.
Putting it back together will be the fun bit.
No damage to the body or floor mouldings itself, only the added fibreglass
joining the 2.
Oh, and where i cut the body into 3 parts, otherwise it would have been
almost impossible to move.
But apart from those cuts, one across the middle of the sills, and one down
the front wings (i've a thought to make it a flip front like the 2+2) all
cuts were were where the original joints were.
And one horizontal cut across the vertical rear panel behind the X brace (or
on mine a Y brace as one end had rusted off), that left part of it on the
body and part on the floor and reinforced both of them.
I think it would have been almost impossible (or at least taken 10 times
longer) without using a multitool (the ones with the oscillating blades).
With that i could plunge directly into the joints.
There were some surprises in the construction, i will give details later as
some are worth bearing in mind for other owners.
Jim
-----Original Message-----
From: 'Steve Kodź' via Quantum Owners Group
Sent: Thursday, April 18, 2019 10:25 AM
To: quantumowners@googlegroups.com
Subject: Re: [Quantum Owners] I'm sure somebody said kit cars don't go
rusty....
Jim,
All I can say is WOW!
Did it cause much damage to the fibre glass when you pulled it apart?
Regards,
Steve
On 18/04/2019 10:14, Jim Hearne wrote:
I bet yours doesn't look like this now :-)
Jim
-----Original Message----- From: Niall McCracken
Sent: Thursday, April 18, 2019 9:43 AM
To: Quantum Owners Group
Subject: [Quantum Owners] I'm sure somebody said kit cars don't go
rusty....
Ahh that takes me back.... about 3 months
--
h4-turbo.co.uk
quantumowners.club
--
--
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum
Owners Club nor the individuals associated with the Quantum Owners Club or
in the preparation of the above information shall have any liability to any
person or entity with respect to liability, loss, or damage caused or
alleged to be caused directly or indirectly by the instructions contained
within this or related message(s).
---
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
--
You received this message because you are subscribed to the Google Groups "Quantum
Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/quantumowners?hl=en
IMPORTANT NOTE: All information presented herewith is provided on an "As Is"
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor
the individuals associated with the Quantum Owners Club or in the preparation of the
above information shall have any liability to any person or entity with respect to
liability, loss, or damage caused or alleged to be caused directly or indirectly by the
instructions contained within this or related message(s).
---
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.